Publications

2023

  • Dambly, V., Rivière, E., Ducobu, F., & Verlinden, O. (2023). Tri-dexel-based cutter-workpiece engagement: computation and validation for virtual machining operations. "International Journal of Advanced Manufacturing Technology". doi:10.1007/s00170-023-10950-z
    IJAMT_DexelSimu.pdf (3586kb)
  • Spitaels, L., Dantinne, H., Bossu, J., Rivière, E., & Ducobu, F. (10 March 2023). A Systematic Approach to Determine the Cutting Parameters of AM Green Zirconia in Finish Milling. "Journal of Composites Science, 7" (3), 112. doi:10.3390/jcs7030112
    SPITAELS-2023-MDPI JCS.pdf (2114kb)

2022

  • Malakizadi, A., Bertolini, R., Ducobu, F., Kilic, Z. M., Magnanini, M. C., & Shokrani, A. (25 October 2022). Recent advances in modelling and simulation of surface integrity in machining - A review. "Procedia CIRP, 115", 232 - 240. doi:10.1016/j.procir.2022.10.079
    Duco2022VII_CIRPeMalak.pdf (1478kb)
  • KUGALUR PALANISAMY, N., RIVIERE LORPHEVRE, E., Gobert, M., Briffoteaux, G., Tuyttens, D., Arrazola, P.-J., & DUCOBU, F. (06 June 2022). Identification of the Parameter Values of the Constitutive and Friction Models in Machining Using EGO Algorithm: Application to Ti6Al4V. "Metals, 12" (6), 976. doi:10.3390/met12060976
    metals-12-00976-v2.pdf (2487kb)
  • Spitaels, L., Rivière, E., Díaz, M. C., Duquesnoy, J., & Ducobu, F. (01 June 2022). Surface finishing of EBM parts by (electro-)chemical etching. "Procedia CIRP, 108", 112-117. doi:10.1016/j.procir.2022.03.023
    2022-SPITAELS-ProcediaCIRP.pdf (1049kb)
  • Spitaels, L., Rivière, E., Demarbaix, A., Thielens, V., & Ducobu, F. (2022). Dimensional and geometrical performance assessment of two FDM printers using a benchmark artifact. "Proceedings of the European Society for Precision Engineering and Nanotechnology - 22nd International Conference and Exhibition", 69-72.
    _2022-SPITAELS-euspen.pdf (364kb)
  • Beuscart, T., Arrazola, P.-J., Rivière, E., Flores, P., & Ducobu, F. (May 2022). Hole quality analysis of AISI 304-GFRP stacks using robotic drilling. "Procedia CIRP, 108", 436-441. doi:10.1016/j.procir.2022.03.068
    CSI_article_compressed.pdf (335kb)
  • Kugalur Palanisamy, N., Rivière, E., Arrazola, P.-J., & Ducobu, F. (28 April 2022). Influence of Coulomb’s Friction Coefficient in Finite Element Modeling of Orthogonal Cutting of Ti6Al4V. "Key Engineering Materials, 926", 1619-1628.
    Duco2022VI_ESAFORM2022Kuga.pdf (722kb)
  • DUCOBU, F., Mélice, E., Rivière-Lorphèvre, E., Beuscart, T., Aizpuru, O., Granjon, A., Flores, P., Soriano, D., Cuesta, M., & Arrazola, P.-J. (09 April 2022). Sensitivity Analysis of Various Geometries of PCD and Cemented Tungsten Carbide Cutting Tools during the Milling of GFRP Composite. "Polymers, 14" (8), 1524. doi:10.3390/polym14081524
    Duco2022II_Polymers.pdf (9222kb)
  • Colantonio, L., Dehombreux, P., Hajzman, M., & Verlinden, O. (2022). 3D projection of the LuGre friction model adapted to varying normal forces. "Multibody System Dynamics".
    Colantonio2022_Article_3DProjectionOfTheLuGreFriction.pdf (3224kb)
  • Spitaels, L., Rivière, E., Demarbaix, A., & Ducobu, F. (17 March 2022). Adaptive benchmarking design for additive manufacturing processes. "Measurement Science and Technology, 33" (064003).
    mst_33_6_064003.pdf (2986kb)
  • Colantonio, L., Equeter, L., Dehombreux, P., & Ducobu, F. (24 November 2022). "Cutting Tool Health Monitoring in Turning with Artificial Intelligence Technique". Paper presented at 6th International Conference on System Reliability and Safety, Venise, Italy.
    Colantonio_ICSRS2022_Abstract.pdf (59kb)
  • Malakizadi, A., Bertolini, R., Ducobu, F., Kilic, Z. M., Magnanini, M. C., & Shokrani, A. (25 October 2022). "Recent advances in modelling and simulation of surface integrity in machining – a review". Paper presented at 10th CIRP Global Web Conference – Material Aspects of Manufacturing Processes.
  • Dupont, P. (15 September 2022). "The Life of one of the Fathers of the Strength of Materials : Stephen Pr. TIMOSHENKO". Paper presented at IMAT2022 - International Materials Application & Technology, NEW-ORLEANS, United States - Louisiana.
  • Dupont, P. (14 September 2022). "Where the Conjunction of Factors gives Original & Incredible Failures : the Effects of Secondary Order Influences !" Paper presented at IMAT2022 - International Materials Application & Technology, NEW-ORLEANS, United States - Louisiana.
  • Dupont, P. (14 September 2022). "Endoscopy as a Non destructive Testing Tool for Failure Prevention in Machineries !" Paper presented at IMAT2022 - International Materials Application & Technology, NEW-ORLEANS, United States - Louisiana.
  • Dupont, P. (13 September 2022). "A New Heuristics for Preventing nowadays modern Machine Design Failures". Paper presented at IMAT2022, Failure Analysis & Prevention Symposium - Session "Gears, Shafts & Bearings", NEW-ORLEANS, United States - Louisiana.
  • Spitaels, L., Rivière, E., Díaz, M. C., Duquesnoy, J., & Ducobu, F. (09 June 2022). "Surface finishing of EBM parts by (electro-)chemical etching". Paper presented at 6th CIRP Conference on Surface Integrity.
  • Beuscart, T., Rivière, E., Ducobu, F., & Arrazola, P.-J. (08 June 2022). "Hole quality analysis of AISI 304-GFRP stacks using robotic drilling". Paper presented at 6th CIRP Conference on Surface Integrity.
    CSI_PROCIR-D-21-00560 .pdf (1529kb)
  • Dambly, V. (May 2022). "Robotic Machining: Dexel-based virtual manufacturing for dynamics simulation". Paper presented at Journée Manufacturing'21, Besançon, France.
  • Kugalur palanisamy, N., Rivière, E., Arrazola, P.-J., & Ducobu, F. (28 April 2022). "Influence of Coulomb’s Friction Coefficient in Finite Element Modeling of Orthogonal Cutting of Ti6Al4V". Paper presented at 25th International Conference on Material Forming, ESAFORM 2022.
  • Equeter, L., Do, P., Dehombreux, P., & Iung, B. (2022). Opportunistic maintenance for multi-component system with structural dependence under resource constraints. In M. C. Leva, E. Patelli, L. Podofillini, ... S. Wilson (Eds.), "Book of Extended Abstracts for the 32nd European Safety and Reliability Conference (ESREL 2022)" (pp. 21-22). Singapour, Singapore: Research Publishing.
    ESREL_2022_Extended_abstract_ASPUBLISHED.pdf (228kb)
  • Dambly, V., Rivière, E., & Verlinden, O. (June 2022). Tri-Dexel Based Cutter-Workpiece Engagement Determination For Robotic Machining Simulator. "Procedia CIRP, 107", 1059 - 1064. doi:10.1016/j.procir.2022.05.108
    1-s2.0-S2212827122003924-main.pdf (768kb)
  • Bossu, J., Delaunois, F., Martic, G., Delmotte, C., Spitaels, L., Ducobu, F., & Rivière, E. (24 October 2022). "Pellets Additive Manufacturing of dense Tosoh black zirconia parts". Poster session presented at Conférence internationale Matériaux 2022, Lille, France.
  • Equeter, L., Tiberi, L., & Dehombreux, P. (06 September 2022). "The ecosystem of Industry 5.0: toward radical changes in industry?" Poster session presented at Mardi des Chercheurs, Mons, Belgium.
    Equeter_Poster_MdC2022.pdf (339kb)
  • Colantonio, L., Equeter, L., Dehombreux, P., & Ducobu, F. (06 September 2022). "Predicting the Health of Cutting Tools with Artificial Intelligence". Poster session presented at Mardi des Chercheurs 2022 (MdC2022).
    Colantonio_poster_MdC2022.pdf (1158kb)
  • Bossu, J., Delaunois, F., Spitaels, L., Ducobu, F., & Rivière, E. (06 September 2022). "Production hybride de pièces fabriquées par additif à base de granulés (PIM-MIM-CIM) (Win²Wal – HyProPAM)". Poster session presented at Mardi des chercheurs, Mons, Belgium.
  • Spitaels, L., Rivière, E., Bossu, J., & Ducobu, F. (September 2022). "Hybrid Manufacturing of Complex Ceramic Parts with Tight Tolerances and Smooth Surface Topography". Poster session presented at Mardi des Chercheurs - onzième éditions (2022), Mons, Belgium.
    2022-09-01-SPITAELS Poster ver A0 Printed.pdf (964kb)
  • Spitaels, L., Rivière, E., Demarbaix, A., Thielens, V., & Ducobu, F. (01 June 2022). "Performances assessment of two FDM printers using a benchmark artifact". Poster session presented at euspen's 22 nd International Conference & Exhibition.
    2022-05-26-SPITAELS Poster ver 2 Print A0.pdf (770kb)
  • Quenon, A., Demarbaix, A., & Demaret, B. (14 June 2022). "Analyzing Apparatus".
  • Bossu, J., Delaunois, F., Spitaels, L., Ducobu, F., & Rivière, E. (08 December 2022). "HYbrid PROduction of Pellets-based (PIM-MIM-CIM) Additive Manufactured parts - HyProPAM". Paper presented at Conférence méca, Mons, Belgium.
  • Leroy, C., Lavernhe, S., & Rivière, E. (21 October 2022). "Lissage et rééchantillonnage de trajectoires curvilinéaires par splines d'Hermite". Paper presented at Manufacturing 21, Gif-sur-Yvette (Paris), France.
    Article_Manuf21_2022_def.pdf (640kb)

2021

  • Dupont, P. (2021). Failure of Rolling-Element Bearings and Their Prevention. In M. Bret A., S. Roch. J., P. Ronnald J., D. Danniel P., & N. Amy, "ASM Handbook Vol. n°11A : Analysis and Prevention of Component & Equipment Failures, 1st Ed. 2021" (1st Ed. - Additional Volume to Volume n°11 : Failure Analysis & Prevention, pp. 445-496). NOVELTY, United States - Ohio: ASM International. doi:10.31399/asm.hb.v11A.a0006834
  • Colantonio, L., Equeter, L., Dehombreux, P., & Ducobu, F. (10 December 2021). A Systematic Literature Review of Cutting Tool Wear Monitoring in Turning by Using Artificial Intelligence Techniques. "Machines, 9" (351), 1-54. doi:10.3390/machines9120351
    machines-09-00351.pdf (1710kb)
  • Demarbaix, A., Ducobu, F., Preux, N., Petit, F., & Rivière, E. (06 September 2021). Binder influence on green ceramic machining by means of milling and laser machining. "Procedia CIRP, 101", 206-209.
    Duco2021XI_CIRPHPCdema.pdf (742kb)
  • Demarbaix, A., Mulliez, M., Rivière, E., Spitaels, L., Dutertre, C., Preux, N., Petit, F., & Ducobu, F. (2021). Green Ceramic Machining: Determination of the Recommended Feed Rate for Y-TZP Milling. "Journal of Composites Science".
    Demarbaix2021.pdf (5036kb)
  • Sela, A., Soler, D., Ortiz De Zarate, G., Germain, G., Ducobu, F., & Arrazola, P. (21 July 2021). Inverse Identification of the Ductile Failure Law for Ti6Al4V Based on Orthogonal Cutting Experimental Outcomes. "Metals, 11" (1154).
    Duco2021IV_MetalsSela.pdf (9767kb)
  • Spitaels, L., Rivière, E., Demarbaix, A., & Ducobu, F. (2021). Development of a novel benchmark artifact for Additive Manufacturing processes. "Proceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology", 99-102.
    2021-SPITAELS.pdf (399kb)
  • Jerraya, A. A., Romdhani, M., Le Marrec, P., Hessel, F., Coste, P., Valderrama, C., Daveau, M., & Zergainoh, N.-E. (2021). Development of a novel benchmark artifact for Additive Manufacturing processes. "Proceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology", 99-102.
    Duco2021VI_euspenSpit.pdf (431kb)
  • Ducobu, F., Arrazola, P., & Aristimuño, P. (2021). Use of the CEL method for estimating the minimum chip thickness when orthogonal cutting Ti6Al4V. "Proceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology", 381-382.
    Duco2021V_euspen.pdf (279kb)
  • Kugalur Palanisamy, N., Rivière, E., Arrazola, P., & Ducobu, F. (29 May 2021). Influence of Constitutive Models and the Choice of the Parameters on FE Simulation of Ti6Al4V Orthogonal Cutting Process for Different Uncut Chip Thicknesses. "Journal of Manufacturing and Materials Processing, 5".
    Duco2021II_JMMPkuga.pdf (36132kb)
  • Ducobu, F., Arrazola, P., Rivière, E., & Filippi, E. (01 May 2021). On the selection of an empirical material constitutive model for the finite element modeling of Ti6Al4V orthogonal cutting, including the segmented chip formation. "International Journal of Material Forming, 4" (3), 361 - 374. doi:10.1007/s12289-020-01535-2
    Duco2020_IJFO.pdf (4616kb)
  • Ducobu, F., Demarbaix, A., & Pantalé, O. (14 April 2021). Finite element modelling of the Taylor impact test in 3D with the Coupled Eulerian-Lagrangian method. "24th International ESAFORM Conference on Material Forming, ESAFORM 2021, 316".
    Duco2021VIII_ESAFORM2021.pdf (654kb)
  • Beuscart, T., Arrazola, P., Rivière, E., & Ducobu, F. (14 April 2021). Development and experimental validation of a macroscopic analytical model aiming to generate metal-FRP stacks drilling cutting force and torque. "24th International ESAFORM Conference on Material Forming, ESAFORM 2021, 2373".
    Duco2021X_ESAFORM2021beus.pdf (638kb)
  • Demarbaix, A., Ducobu, F., Juste, E., Petit, F., DUTERTE, C., & Rivière, E. (01 January 2021). Experimental investigation on green ceramic machining with nanosecond laser source. "Journal of Manufacturing Processes, 61", 245-253. doi:10.1016/j.jmapro.2020.11.031
    Demarbaix2101.pdf (5362kb)
  • Dupont, P. (30 September 2021). "Discussing the Complexity and Human Factor while Preventing Failures". Paper presented at IMAT2021 - International Materials Application & Technology.
  • Dupont, P. (30 September 2021). "Where Bridges may fail "by Fatigue" or in Long Terms Usage : a Prevention oriented Approach". Paper presented at IMAT2021 - International Materials Application & Technology.
  • Dupont, P. (30 September 2021). "Some Prevention Design Considerations of Fatigue Failures in Suspension Bridges". Paper presented at IMAT2021 - International Materials Application & Technology.
  • Equeter, L., Ducobu, F., & Dehombreux, P. (29 June 2021). "A time-dependent Proportional Hazard model for cutting tools Remaining Useful Life estimate under varying cutting parameters". Paper presented at 11th IMA International Conference on Modelling in Industrial Maintenance and Reliability (MIMAR), Nottingham, Unknown/unspecified.
    MIMAR2021.pdf (30136kb)
  • Dupont, P. (04 June 2021). "Modern Tribological Trends in the Rolling-elements Bearing's Industry in Terms of Materials, Heat Treatments & Coatings". Paper presented at ICEAF VI, 2021, International Conference on Engineering against Fracture, SPETSES, Greece, EU.
  • Ducobu, F., Arrazola, P., & Aristimuño, P. (01 June 2021). "Use of the CEL method for estimating the minimum chip thickness when orthogonal cutting Ti6Al4V". Paper presented at euspen's 21st International Conference & Exhibition, Copenhage, Denmark.
  • Demarbaix, A., Ducobu, F., Preux, N., Petit, F., & Rivière, E. (24 May 2021). "Binder influence on green ceramic machining by means of milling and laser machining". Paper presented at 9th CIRP Conference on High Performance Cutting, HPC 2020.
  • Ducobu, F., Demarbaix, A., & Pantalé, O. (15 April 2021). "Finite element modelling of the Taylor impact test in 3D with the Coupled Eulerian-Lagrangian method". Paper presented at ESAFORM 2021, Liège, Belgium.
  • Beuscart, T., Arrazola, P.-J., Rivière, E., & Ducobu, F. (14 April 2021). "Development and experimental validation of a macroscopic analytical model aiming to generate metal-FRP stacks drilling cutting force and torque". Paper presented at 24th International ESAFORM Conference on Material Forming, ESAFORM 2021.
  • Spitaels, L. (26 January 2021). "Développement d'une pièce test pour caractériser les procédés AM : 29èmes Journées Manufacturing'21". Paper presented at 29èmes Journées Manufacturing'21, Online, Unknown/unspecified.
    2021_-_SPITAELS_Manuf21_.pdf (1975kb)
  • Rivière, E., Broz Lofetigo, A., Dehombreux, P., Dvorak, J., Equeter, L., Hosnedl, S., Marketa, K., Lazaroi Lechuga, E., Lindell, M., Lindgern, P., Nemec, L., Neuvonen, T., Olivier, B., Ranalli, M., Varhelahti, M., Varona Alabern, M., Verlinden, O., & Cepickova, J. (2021). MUPIC: MULTIDISCIPLINARY PROJECT IN AN INTERNATIONAL CONTEXT. In Hans-Ulrich Heiss (Ed.), "Proceedings of SEFI 49th Annual Conference Blended Learning in Engineering Education: challenging, enlightening – and lasting?"Berlin, Unknown/unspecified: Technische universitat Berlin.
  • Colantonio, L., Dehombreux, P., Hajzman, M., & Verlinden, O. (2021). "3D LuGre Model for Multibody Systems Involving Contacts with Stick-slip". Paper presented at ECCOMAS Thematic Conference on Multibody Dynamics, Budapest, Hungary.
    AbstractColantonioVerlindenRevised.pdf (200kb)
  • Dambly, V., Huynh, H. N., Verlinden, O., & Rivière, E. (2021). Coupled multibody model of industrial robot with milling simulator for trajectory compensation. "ECCOMAS Multibody Dynamics Conference Proceedings". doi:10.3311/ECCOMASMBD2021-139
    ECCOMASMBD2021_FullPaper_DamblyValentin_reviewed.pdf (597kb)
  • Dambly, V., Huynh, H. N., Rivière, E., & Verlinden, O. (2021). Development of tri-dexel based cutting simulator for cutter-workpiece engagement and cutting forces determination. "Procedia euspen".
    ICE21_DamblyValentin_VF.pdf (1579kb)
  • Kugalur Palanisamy, N., Rivière, E., Arrazola, P., & Ducobu, F. (2021). "Influences of cutting speed and material constitutive models on chip formation and their effects on the results of Ti6Al4V orthogonal cutting simulation". Paper presented at ESAFORM 2021, Liège, Belgium.
    Duco2021IX_ESAFORM2021kuga.pdf (829kb)
  • Spitaels, L., Rivière, E., Anthonin, D., & Ducobu, F. (June 2021). "Development of a novel benchmark artifact for Additive Manufacturing processes". Poster session presented at euspen’s 21st International Conference & Exhibition.
    SPITAELS Poster ver 1.pdf (351kb)
  • Spitaels, L., & Ducobu, F. (26 April 2021). "Evènement de maillage UMHAP : Faculté Polytechnique de Mons Service de Génie Mécanique". Poster session presented at Evènement de maillage UMHAP, Mons, Belgium.
    poster_UMHAP-DUCOBU-SPITAELS.pdf (617kb)
  • Dambly, V., Verlinden, O., & Rivière, E. (20 March 2021). "Robotic Milling: Development of 3D milling forces computation module for tool trajectories adaptation". Poster session presented at Mardi des chercheurs, Valenciennes, France.
    dambly-valentin-poster.pdf (1318kb)
  • Beuscart, T., Ducobu, F., & Rivière, E. (2021). "Etude de l'usinage robotique de stacks métaux-composites". Poster session presented at Mardi des chercheurs 2021, Valenciennes, France.
    Poster_MachStack (2).pdf (1105kb)
  • Spitaels, L. (2021). "Fabrication Additive et règles de conception 2020-2021 - cours 6 - Benchmarking des procédés de Fabrication Additive".

2020

  • Equeter, L., Ducobu, F., & Dehombreux, P. (18 December 2020). Cutting Tools Replacement: Toward a Holistic Framework. "IFAC-PapersOnLine, 53" (3), 227-232. doi:10.1016/j.ifacol.2020.11.037
    1-s2.0-S240589632030183X-main.pdf (655kb)
  • Huynh, H. N., Assadi, H., Dambly, V., Rivière, E., & Verlinden, O. (30 September 2020). Direct method for updating flexible multibody systems applied to a milling robot. "Robotics and Computer-Integrated Manufacturing, 68", 102049. doi:10.1016/j.rcim.2020.102049
    1-s2.0-S073658452030260X-main.pdf (2281kb)
  • Zhao, L., Santos Macias, J. G., Dolimont, A., Simar, A., & Rivière, E. (12 August 2020). Comparison of residual stresses obtained by the crack compliance method for parts produced by different metal additive manufacturing techniques and after friction stir processing. "Additive Manufacturing, 36", 101499. doi:10.1016/j.addma.2020.101499
    main.pdf (6705kb)
  • Demarbaix, A., Ducobu, F., Petit, F., & Rivière, E. (2020). A new manufacturing chain for ceramic shaping: Sequential combination of milling and laser machining in green ceramic. "Proceedings of the 20th International Conference of the European Society for Precision Engineering and Nanotechnology".
    Duco2020VII_euspen2020.pdf (428kb)
  • Sela, A., Ortiz De Zarate, G., Soler, D., Aristimuño, P., Soriano, D., Germain, G., Ducobu, F., & Arrazola, P. (01 June 2020). Surface drag analysis after Ti-6Al-4V orthogonal cutting using grid distortion. "Procedia CIRP, 87", 372-377. doi:10.1016/j.procir.2020.02.040
    Duco2020V_5thCIRPCSIsela.pdf (740kb)
  • Demarbaix, A., Ducobu, F., Preux, N., Petit, F., & Rivière, E. (21 May 2020). Green Ceramic Machining: Influence of the Cutting Speed and the Binder Percentage on the Y-TZP Behavior. "Journal of Manufacturing and Materials Processing, 4" (50). doi:10.3390/jmmp4020050
    jmmp-04-00050_(1).pdf (918kb)
  • Equeter, L., Devlamincq, R., Ducobu, F., Dutoit, C., & Dehombreux, P. (19 May 2020). Use of Longitudinal Roughness Measurements as Tool End-of-Life Indicator in AISI 1045 Dry Longitudinal Turning. "Materials Science Forum, 986", 93-101. doi:10.4028/www.scientific.net/MSF.986.93
    MSF.986.93.pdf (1692kb)
  • Spitaels, L., Ducobu, F., Demarbaix, A., Rivière, E., & Dehombreux, P. (27 April 2020). Influence of conventional machining on chemical finishing of Ti6Al4V Electron Beam Melting parts. "Procedia Manufacturing, 47", 1036-1042. doi:10.1016/j.promfg.2020.04.321
    2020-SPITAELS.pdf (978kb)
  • Kugalur Palanisamy, N., Rivière, E., Ducobu, F., & Arrazola, P. (27 April 2020). Influence of the Choice of the Parameters on Constitutive Models and their Effects on the Results of Ti6Al4V Orthogonal Cutting Simulation. "Procedia Manufacturing, 47", 458-465. doi:10.1016/j.promfg.2020.04.335
    Kugalur-Palanisamy_et_al._-_2020_-_Influence_of_the_Choice_of_the_Parameters_on_Constitutive_Models_and_their_Effects_on_the_Results_of.pdf (1426kb)
  • Ducobu, F., Rivière, E., Demarbaix, A., & Lauwers, B. (2020). Prediction of local sintering in laser beam machining of green Y-TZP ceramic. "CIRP Annals - Manufacturing Technology". doi:10.1016/j.cirp.2020.04.051
    CIRP2020.pdf (826kb)
  • Equeter, L., Ducobu, F., Rivière, E., Serra, R., & Dehombreux, P. (27 March 2020). An Analytic Approach to the Cox Proportional Hazards Model for Estimating the Lifespan of Cutting Tools. "Journal of Manufacturing and Materials Processing, 4" (27), 1-13. doi:10.3390/jmmp4010027
    jmmp-04-00027.pdf (993kb)
  • Equeter, L., Ducobu, F., & Dehombreux, P. (10 September 2020). "Cutting tools replacement: Toward a holistic framework". Paper presented at 4th IFAC Workshop on Advanced Maintenance Engineering, Services and Technologies, AMEST 2020.
  • Ducobu, F., Rivière, E., Demarbaix, A., & Lauwers, B. (15 August 2020). "Prediction of local sintering in laser beam machining of green Y-TZP ceramic". Paper presented at CIRP General Assembly, Munich, Germany.
  • Sela, A., Ortiz-De-Zarate, G., Soler, D., Aristimuño, P., Soriano, D., Germain, G., Ducobu, F., & Arrazola, P. J. (01 June 2020). "Surface drag analysis after Ti-6Al-4V orthogonal cutting using grid distortion". Paper presented at 5th CIRP Conference on Surface Integrity, CSI 2020.
  • Spitaels, L. (04 May 2020). "Influence of conventional machining on chemical finishing of Ti6Al4V Electron Beam Melting parts: 23rd International Conference on Material FORMing (ESAFORM 2020)". Paper presented at Esaform 2020, Cottbus , Germany.
    2021_-_SPITAELS_ESAFORM_.pdf (1478kb)
  • Spitaels, L., Ducobu, F., Demarbaix, A., Rivière, E., & Dehombreux, P. (04 April 2020). "Influence of conventional machining on chemical finishing of Ti6Al4V electron beam melting parts". Paper presented at 23rd International Conference on Material Forming, ESAFORM 2020.
  • El Hiki, L. (05 March 2020). "La dynamique d'accréditation hospitalière en Belgique : état des lieux". Paper presented at 5èmes Journées Internationales Francophones pour la Qualité et la Sécurité des Soins, Tunis, Tunisia.
  • Kugalur Palanisamy, N., Ducobu, F., Rivière, E., & Arrazola, P. (2020). "Influence of the Choice of the Parameters on Constitutive Models and their Effects on the Results of Ti6Al4V Orthogonal Cutting Simulation". Paper presented at Esaform 2020, Cottbus , Germany.
    ESAFORM_2020_Nithyaraaj.pdf (752kb)
  • Demarbaix, A., Ducobu, F., Petit, F., & Rivière, E. (08 June 2020). "A new manufacturing chain for ceramic shaping: Sequential combination of milling and laser machining in green ceramic". Poster session presented at 20th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2020.
  • Equeter, L. (2020). "Optimal Replacement of Cutting Tools through Degradation Monitoring Techniques and Residual Lifetime Prediction Models". Unpublished doctoral thesis, Université de Mons. doi:10.13140/RG.2.2.23962.06080Jury: Dehombreux, P. (Promotor), Ducobu, F. (Promotor), Kouroussis, G., Dehombreux, P., Pintelon, L., Serra, R., Ducobu, F., Rivière, E., Adjallah, K. H., & Attanasio, A.
  • Demarbaix, A. (2020). "Characterization of Green Ceramic Machining (GCM) by means of milling and laser in order to develop a new manufacturing chain for ceramic (MACHCERAM)". Unpublished doctoral thesis, Université de Mons. Jury: Rivière, E. (Promotor), & Ducobu, F. (Promotor).
  • Spitaels, L. (2020). "Geocom 2020-2021 - TP4 - Présentation (Géométrie, communication graphique et infographie) : Notes de laboratoires - présentation en séance".
  • Spitaels, L. (2020). "Geocom EXOS 2020-2021 - Séance 4 - Notes d'exercices - résolus (Géométrie, communication graphique et infographie)".
  • Spitaels, L. (2020). "'Geocom EXOS 2020-2021 - Séance 4 - Notes d'exercices - énoncés (Géométrie, communication graphique et infographie)".
  • Spitaels, L. (2020). "Geocom EXOS 2020-2021 - Séance 1 - Notes d'exercices - énoncés (Géométrie, communication graphique et infographie)".
  • Spitaels, L. (2020). "Geocom EXOS 2020-2021 - Séance 1 - Notes d'exercices - résolus (Géométrie, communication graphique et infographie)".
  • Spitaels, L. (2020). "Laboratoire 3 - implantation - Notes de laboratoires - présentation en séance (Topographie)".
  • Spitaels, L. (2020). "Laboratoire 2 - lever - Notes de laboratoires - présentation en séance (Topographie)".
  • Spitaels, L. (2020). "Laboratoire 2 - lever - Notes de laboratoires - méthodologie (Topographie)".
  • Quenon, A., Demarbaix, A., & Demaret, B. (14 December 2020). "Analyzing apparatus".
  • Equeter, L. (2020). "I-GMEC-023 Laboratoire de métrologie au marbre".
  • Spitaels, L. (2020). "Geocom 2020-2021 - TP4 - Verre (Géométrie, communication graphique et infographie) : Vidéo de présentation".
  • Spitaels, L. (2020). "Geocom 2020-2021 - TP4 - Chaise (Géométrie, communication graphique et infographie) : Vidéo de présentation".
  • Spitaels, L. (2020). "Geocom 2020-2021 - TP4 - Fonction nervure (Géométrie, communication graphique et infographie) : Vidéo de présentation".
  • Equeter, L. (2020). "I-GMEC-023 Labo SW Module 3".
  • Spitaels, L. (2020). "Geocom EXOS 2020-2021 - Séance 4 - Vidéo de présentation des énoncés (Géométrie, communication graphique et infographie)".
  • Equeter, L. (2020). "I-GMEC-023 Labo SW Module 2_PART 1".
  • Spitaels, L. (2020). "Geocom EXOS 2020-2021 - Séance 1 - Vidéo de présentation des énoncés (Géométrie, communication graphique et infographie)".
  • Equeter, L. (2020). "IFAC AMEST2020 - Equeter et al. Cutting Tools Replacement: Toward a Holistic Framework".
  • Demarbaix, A. (2020). "Quand l'Art rencontre la Science!"
  • Equeter, L. (2020). "I-GRME-031: Masselottes et système d'attaque".
  • Equeter, L. (2020). "I-GRME-031: Création de moules - 04 - Enlèvement des noyaux".
  • Equeter, L. (2020). "I-GRME-031: Création de Moules - 01 - Analyse dépouille".
  • Equeter, L. (2020). "I-GRME-031: Création de moules - 02 - Ajout dépouille".
  • Equeter, L. (2020). "I-GRME-031: Création de moules - 03 - Obtention des demi-moules".

2019

  • Dutoit, C., Dehombreux, P., Rivière, E., & Equeter, L. (2019). Statistical Process Control and Maintenance Policies for Continuous Production Systems Subjected to Different Failure Impact Models: Literature Review. "Procedia CIRP". doi:10.1016/j.procir.2020.01.050
    Dutoit_Cirpe.pdf (500kb)
  • Huynh, H., Assadi, H., Rivière, E., Verlinden, O., & Ahmadi, K. (17 September 2019). Modelling the dynamics of industrial robots for milling operations. "Robotics and Computer-Integrated Manufacturing, 61". doi:10.1016/j.rcim.2019.101852
    RCIM_ModellingDynamicsRobot_HNH_2019.pdf (4373kb)
  • Rivière, E., Huynh, H., Ducobu, F., & Verlinden, O. (08 July 2019). Cutting Force Prediction in Robotic Machining. "Procedia CIRP, 82", 509-514. doi:10.1016/j.procir.2019.04.143
    riviere et al.pdf (819kb)
  • Leroy, C., Rivière, E., Ducobu, F., Lavernhe, S., Tournier, C., & Filippi, E. (02 July 2019). Performance simulation of different toolpaths in 2D1/2 pocket milling. "AIP Conference Proceedings, 2113". doi:10.1063/1.5112609
  • Benhassine, M., Rivière, E., Arrazola, P., Gobin, P., Granjon, A., Aizpuru, O., & Ducobu, F. (02 July 2019). Finite-element simulations of Al7075-T6 orthogonal cutting: Effect of part geometry and mesh on chip morphology and formation mechanism. "AIP Conference Proceedings, 2113". doi:10.1063/1.5112611
    Duco2019I_ESAFORM2019benh.pdf (1227kb)
  • Kugalur Palanisamy, N., Rivière, E., Pedro, A., & Ducobu, F. (02 July 2019). Comparison of Johnson-Cook and modified Johnson-Cook material constitutive models and their influence on finite element modelling of Ti6Al4V orthogonal cutting process. "AIP Conference Proceedings, 2113". doi:10.1063/1.5112617
    Duco2019II_ESAFORM2019kuga.pdf (1794kb)
  • Dolimont, A., Demarbaix, A., Ducobu, F., & Rivière, E. (02 July 2019). Chemical etching as a finishing process for electron beam melting (EBM) parts. "AIP Conference Proceedings, 2113" (150020). doi:10.1063/1.5112696
  • Ducobu, F., Rivière, E., Galindo-Fernandez, M., Ayvar-Soberanis, S., Arrazola, P., & Ghadbeigi, H. (13 June 2019). Coupled Eulerian-Lagrangian (CEL) simulation for modelling of chip formation in AA2024-T3. "Procedia CIRP, 82", 142-147. doi:10.1016/j.procir.2019.04.071
    Duco2019V_17thCIRPduco.pdf (868kb)
  • Ortiz-De-Zarate, G., Ducobu, F., Sela, A., Saez-De-Buruaga, M., Soler, D., Childs, T. H. C., & Arrazola, P. (13 June 2019). Evaluation of different flow stress laws coupled with a physical based ductile failure criterion for the modelling of the chip formation process of Ti-6Al-4V under broaching conditions. "Procedia CIRP, 82", 65-70. doi:10.1016/j.procir.2019.04.067
    Duco2019VI_17thCIRPorti.pdf (1705kb)
  • Demarbaix, A., Rivière, E., Ducobu, F., Filippi, E., Petit, F., & Juste, E. (2019). Calibration method of hybrid machining process in the green ceramic combining micro-milling and laser machining. "European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019", 76-77.
    Euspen2019-Demarbaix.pdf (273kb)
  • Dehombreux, P. (19 November 2019). "Industrie 1.2.3.4...0 Quelles évolutions pour la maintenance?" Paper presented at Forum BEMAS, Marcinelle, Belgium.
  • Dupont, P. (31 October 2019). "On the different Rolling Contact Fatigue Theories and their use in Industrial Design & FA". Paper presented at MS&T'19 - Materials Science & Technology Conference.
  • Dupont, P. (31 October 2019). "On the use of thermal simulations to explain complex failures modes of bearings within machineries". Paper presented at MS&T'19 - Materials Science & Technology Conference.
  • Dupont, P. (31 October 2019). "The power of the "infinite smalls" where heavy rude working conditions are involved !" Paper presented at MS&T'19 - Materials Science & Technology Conference.
  • Dupont, P. (31 October 2019). "When a highway bridge suddenly lifts itself up without prior announcement … !" Paper presented at MS&T'19 - Materials Science & Technology Conference.
  • Ducobu, F. (25 October 2019). "Presentation of research activities". Paper presented at Rencontre Safran Aero Boosters, Mons, Belgium.
  • Lequeu, R., GOVAERTS, D., Binon, J.-P., & El Hiki, L. (17 October 2019). "Apports de l'Internet des Objets aux activités du Laboratoires de Biologie Clinique du CHU de Charleroi". Paper presented at Chaire de Management et des Technologie de la Santé de l'EHSEP : Logistique et Architecture de l'Hôpital, Quelles perspecives, CHU de Charleroi, Belgium.
  • Equeter, L., Devlamincq, R., Ducobu, F., Dutoit, C., & Dehombreux, P. (02 October 2019). "Cutting Inserts Wear Monitoring in AISI 1045 Dry Longitudinal Turning through Cutting Forces: a Case Study". Paper presented at MS&T2019, Portland, United States - Oregon.
    preview.PDF (1628kb)
  • Equeter, L., Devlamincq, R., Ducobu, F., Dutoit, C., & Dehombreux, P. (09 August 2019). "Use of longitudinal roughness measurements as tool end-of-life indicator in AISI 1045 dry longitudinal turning". Paper presented at 4th International Conference on Design, Materials and Manufacturing, ICDMM 2019 and the 4th International Conference on Material Engineering and Smart Materials, ICMESM 2019.
  • Kugalur Palanisamy, N. (18 July 2019). "Modeling of orthogonal machining process of Ti6Al4V". Paper presented at 28èmes Journées Manufacturing'21, Mons, Belgium.
  • Equeter, L. (12 July 2019). "Vers une optimisation du remplacement des outils coupants en tournage". Paper presented at 28èmes Journées Manufacturing'21, Mons, Belgium.
  • Demarbaix, A., Ducobu, F., Petit, F., & Rivière, E. (11 July 2019). "Développement d'une platforme hybride pour la mise en forme de la céramique". Paper presented at Manufacturing 21, Mons, Belgium.
  • Ducobu, F. (10 July 2019). "28èmes Journées Manufacturing'21". Paper presented at 28èmes Journées Manufacturing'21, Mons, Belgium. doi:10.1088/1748-0221/5/03/T03001
  • Ducobu, F. (10 July 2019). "Présentation des activités du service deGénie Mécanique en procédés de fabrication (ManUMONS): 28èmes Journées Manufacturing'21". Paper presented at 28èmes Journées Manufacturing'21, Mons, Belgium.
  • Dupont, P. (04 July 2019). "Sur les Matériaux & Coatings innovants dans l'Industrie des Eléments de Guidage". Paper presented at A3TS - 46 Congrès sur les Traitements Thermiques & les Traitements de Surface.
  • Rivière, E., Huynh, H. N., Verlinden, O., & Ducobu, F. (13 June 2019). "Cutting force prediction in robotic machining". Paper presented at 17th CIRP Conference on Modelling of Machining Operations, CIRP CMMO.
  • Ortiz-De-Zarate, G., Sela, A., Ducobu, F., Saez-De-Buruaga, M., Soler, D., Childs, T. H. C., & Arrazola, P. J. (13 June 2019). "Evaluation of different flow stress laws coupled with a physical based ductile failure criterion for the modelling of the chip formation process of Ti-6Al-4V under broaching conditions". Paper presented at 17th CIRP Conference on Modelling of Machining Operations, CIRP CMMO.
  • Ducobu, F., Rivière, E., Galindo-Fernandez, M., Ayvar-Soberanis, S., Arrazola, P., & Ghadbeigi, H. (01 June 2019). "Coupled Eulerian-Lagrangian (CEL) simulation for modelling of chip formation in AA2024-T3". Paper presented at 17th CIRP conference on modelling of machining operations, Sheffield, Unknown/unspecified.
  • Dolimont, A., Santos Macias, J. G., Lv, Z., Simar, A., & Rivière, E. (29 May 2019). "Comparing residual stresses in metal powder bed additive manufacturing (SLM and EBM)". Paper presented at 4th Workshop in AM, Leuven, Belgium.
  • Ducobu, F. (23 May 2019). "Presentation of research activities". Paper presented at Rencontre UMONS-IMT Douai, Mons, Belgium.
  • Leroy, C., Rivière, E., Ducobu, F., Lavernhe, S., Tournier, C., & Filippi, E. (08 May 2019). "Performance simulation of different toolpaths in 2D1/2 pocket milling". Paper presented at 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019.
  • Kugalur palanisamy, N., Rivière, E., Arrazola, P.-J., & Ducobu, F. (08 May 2019). "Comparison of Johnson-Cook and modified Johnson-Cook material constitutive models and their influence on finite element modelling of Ti6Al4V orthogonal cutting process". Paper presented at 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019.
  • Dolimont, A., Demarbaix, A., Ducobu, F., & Rivière, E. (01 May 2019). "Chemical etching as a finishing process for electron beam melting (EBM) parts". Paper presented at Esaform 2019, Vitoria-Gasteiz, Spain.
  • Benhassine, M., Rivière, E., Arrazola, P., Gobin, P., Granjon, A., Aizpuru, O., & Ducobu, F. (01 May 2019). "Finite-element simulations of Al7075-T6 orthogonal cutting: Effect of part geometry and mesh on chip morphology and formation mechanism". Paper presented at Esaform 2019, Vitoria-Gasteiz, Spain.
  • Ducobu, F., & Rivière, E. (21 February 2019). "Transition of the finite element modelling of orthogonal cutting (2D) to oblique cutting (3D)". Paper presented at CIRP Winter Meetings, Paris, France.
  • Leroy, C., Rivière, E., & Ducobu, F. (14 January 2019). "Evaluation de l'efficacité temporelle de trajectoires en fraisage à l'aide de VPOp". Paper presented at Manufacturing 21, Toulon, France.
  • Equeter, L., Ducobu, F., Rivière, E., & Dehombreux, P. (02 October 2019). "An Integrative Approach for Estimating Cutting Tools Wear in Turning". Poster session presented at MS&T2019, Portland, United States - Oregon.
    Poster_Equeter_ASMMST2019.pdf (1429kb)
  • Demarbaix, A., Rivière, E., Ducobu, F., Dolimont, A., Petit, F., & Juste, E. (03 June 2019). "Calibration method of hybrid machining process in the green ceramic combining micro-milling and laser machining". Poster session presented at 19th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2019.
  • Demarbaix, A., Rivière, E., Ducobu, F., & Petit, F. (03 April 2019). "Hybrid platform: sequential combination of two technologies in shaping of ceramic materials". Poster session presented at young Ceramists Additive Manufacturing Forum (yCAM), Mons, Belgium.
    yCAM2019-p-531690.pdf (820kb)
  • Wattiaux, D. (15 March 2019). "Le prototypage rapide comme outil didactique". Poster session presented at 3ème Journée des enseignants UMONS, Mons, Belgium.
    PosterWattiauxA0MECARAJDE2019.pdf (1589kb)
    PosterWattiauxA0GEOCOMJDE2019.pdf (1831kb)
    Exemples.pdf (1092kb)
  • Demarbaix, A., Dehombreux, P., & Filippi, E. (15 March 2019). "FabLab Mons: Un outil pédagogique". Poster session presented at 3ème Journée des Enseignants de l'UMONS, Mons, Belgium.
  • Equeter, L., Dutoit, C., Ducobu, F., & Dehombreux, P. (05 March 2019). "Estimation de l'usure des outils coupants en tournage". Poster session presented at Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium.
    poster--.pdf (1897kb)
  • Demarbaix, A., Dehombreux, P., & Filippi, E. (05 March 2019). "FabLab Mons: Un outil à la recherche". Poster session presented at Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium.
    MdC2019.pdf (865kb)
  • Huynh, H., Rivière, E., & Verlinden, O. (05 March 2019). "Robotic Machining: Development & Validation of a Robotic Machining Numerical Model in order to Optimise the Cutting Parameters". Poster session presented at Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium.
    UMONS_Poster_MdC2019.pdf (3548kb)
  • Leroy, C., Rivière, E., & Ducobu, F. (05 March 2019). "Evaluation de l'efficacité temporelle de trajectoires d'évidement 2D1/2". Poster session presented at Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium.
    2019 MDC.pdf (375kb)
  • Huynh, H. (2019). "Robotic machining: Development and validation of a numerical model of robotic milling to optimise the cutting parameters". Unpublished doctoral thesis, Université de Mons. Jury: Verlinden, O. (Promotor), Rivière, E. (Promotor), Vande Wouwer, A., Ducobu, F., Datoussaïd, S., Brüls, O., Ahmadi, K., & Gagnol, V.
    Thesis_RoboticMilling_HNH_Public_Cover.pdf (27791kb)
  • -. (2019). "Virtual Manufacturing - Practical Exercise".
  • Demarbaix, A., Rivière, E., & Dehombreux, P. (2019). UMONS: Plongée en sous-marin. "journal sudinfo".
    yellowsub.pdf (407kb)
  • Demarbaix, A., & Filippi, E. (2019). Au pays des 'fablabs': A Mons, on veut susciter l'intérêt pour l'Internet des objets. "Journal la Libre".
    La_Libre_1_FabLab_Mons_et_IoT.pdf (1400kb)
  • Rivière, E. (2019). "Journal télévisé RTBF: Coupe d'europe de robotique".
  • Rivière, E. (2019). "Télé MB: Les Atom-X se préparent pour la coupe de robotique".
  • Demarbaix, A. (2019). "Cabaret des Sciences: L'Odyssée de Pi".
  • Dupont, P. (31 May 2019). "La Fatigue des Matériaux : Aspects Généraux & Spécificités". Paper presented at A3TS Conference.

2018

  • Verlinden, O., Huynh, H., Kouroussis, G., & Rivière, E. (01 December 2018). Modelling of flexible bodies with minimal coordinates by means of the corotational formulation. "Multibody System Dynamics, 42" (4), 495-514. doi:10.1007/s11044-017-9609-0
    VER2018 - MUBO9609.pdf (1298kb)
  • Dutoit, C., Dehombreux, P., & Rivière, E. (2018). Using quality control in optimizing opportunistic maintenance. "IFAC Proceedings Volumes".
    IFAC_Safeprocess2018_Dutoit.pdf (517kb)
  • Huynh, H., Rivière, E., Ducobu, F., Ozcan, A., & Verlinden, O. (30 June 2018). Dystamill: a framework dedicated to the dynamic simulation of milling operations for stability assessment. "International Journal of Advanced Manufacturing Technology, 98", 2109-2126. doi:10.1007/s00170-018-2357-3
    10.1007_s00170-018-2357-3.pdf (3352kb)
  • Dolimont, A., Rivière, E., Ducobu, F., & Backaert, S. (02 May 2018). Impact of chemical polishing on surface roughness and dimensional quality of electron beam melting process (EBM) parts. "AIP Conference Proceedings, 1960" (140007). doi:10.1063/1.5034999
    dolimont2018.pdf (362kb)
  • Equeter, L., Ducobu, F., Rivière, E., Abouridouane, M., Klocke, F., & Dehombreux, P. (23 April 2018). Estimation of the Influence of Tool Wear on Force Signals: a Finite Element Approach in AISI 1045 Orthogonal Cutting. "AIP Conference Proceedings, 1960" (070012). doi:10.1063/1.5034908
    2018_ESAFORM_Lucas.pdf (370kb)
  • Ozcan, A., Rivière, E., & Ducobu, F. (23 April 2018). Corner smoothing of 2D milling toolpath using b-spline curve by optimizing the contour error and the feedrate. "AIP Conference Proceedings, 1960" (070020). doi:10.1063/1.5034916
    Ozcan2018.pdf (356kb)
  • Benhassine, M., Rivière, E., Arrazola, P., Gobin, P., Dumas, D., Madhavan, V., Aizpuru, O., & Ducobu, F. (23 April 2018). 2D simulations of orthogonal cutting of CFRP: Effect of tool angles on parameters of cut and chip morphology. "AIP Conference Proceedings, 1960" (070005). doi:10.1063/1.5034901
    benhassine2018.pdf (816kb)
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (07 February 2018). Behaviour of pre-sintered Y-TZP during machining operations: Determination of recommended cutting parameters. "Journal of Manufacturing Processes, 32", 85-92. doi:10.1016/j.jmapro.2018.01.020
    FIN.pdf (1609kb)
  • Rivière, E., Huynh, H., & Verlinden, O. (11 January 2018). Influence of the time step selection on dynamic simulation of milling operation. "International Journal of Advanced Manufacturing Technology, 95" (9-12), 4497-4512. doi:10.1007/s00170-017-1570-9
    version finale web.pdf (3665kb)
  • Dehombreux, P., Dutoit, C., Equeter, L., Rivière, E., & Ducobu, F. (17 October 2018). "Industrie 1.2.3.4.0 : quelle évolution pour la fonction maintenance?" Paper presented at Colloque international : Transformation Numérique des Entreprises - Industrie 4.0, Ecole Centrale Casablanca, Morocco.
  • Dolimont, A., Rivière, E., Ducobu, F., & Backaert, S. (23 April 2018). "Impact of chemical polishing on surface roughness and dimensional quality of electron beam melting process (EBM) parts". Paper presented at 21st International ESAFORM Conference on Material Forming, ESAFORM 2018.
  • Equeter, L., Ducobu, F., Rivière, E., Abouridouane, M., Klocke, F., & Dehombreux, P. (23 April 2018). "Estimation of the influence of tool wear on force signals: A finite element approach in AISI 1045 orthogonal cutting". Paper presented at 21st International ESAFORM Conference on Material Forming, ESAFORM 2018.
  • Ozcan, A., Rivière, E., & Ducobu, F. (23 April 2018). "Corner smoothing of 2D milling toolpath using b-spline curve by optimizing the contour error and the feedrate". Paper presented at 21st International ESAFORM Conference on Material Forming, ESAFORM 2018.
  • Benhassine, M., Rivière, E., Arrazola, P.-J., Gobin, P., Dumas, D., Madhavan, V., Aizpuru, O., & Ducobu, F. (23 April 2018). "2D simulations of orthogonal cutting of CFRP: Effect of tool angles on parameters of cut and chip morphology". Paper presented at 21st International ESAFORM Conference on Material Forming, ESAFORM 2018.
  • Huynh, H., Kouroussis, G., Verlinden, O., & Rivière, E. (2018). "Modal updating of a 6-axis robot for milling application". Paper presented at Proceedings of the 25th International Congress on Sound and Vibration (ICSV25), Hiroshima, Japan.
    HUY2018 - ICSV25_p498.pdf (803kb)
  • Huynh, H., Rivière, E., & Verlinden, O. (2018). "Multibody modelling of a flexible 6-axis robot dedicated to robotic machining". Paper presented at The 5th Joint International Conference on Multibody System Dynamics, Lisbonne, Portugal.
    HuynhRiviereLorphevreVerlinden_fullpaper.pdf (1212kb)
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (03 July 2018). "Hybrid machining of Ceramic: Combination sequential milling and laser machining". Poster session presented at The 5th Researchers' Workshop of the Materials Research Institute, Mons, Belgium.
    The 5th Research's Day of the Materials.pdf (897kb)
  • Equeter, L., Letot, C., Dutoit, C., Serra, R., Ducobu, F., & Dehombreux, P. (27 March 2018). "Use of a Stochastic Model for Updated Remaining Useful Life Estimates". Poster session presented at Mardi des Chercheurs (MdC2018), Valenciennes, France.
    poster--.pdf (2386kb)
  • Dutoit, C., Dehombreux, P., & Equeter, L. (27 March 2018). "Etude de l'optimisation combinée de la maintenance et de la qualité pour un système de production par lots". Poster session presented at Mardi des Chercheurs 2018, Valenciennes, France.
  • Demarbaix, A., & Equeter, L. (16 March 2018). "Jeu 'SMED' Single Minute Exchange of Die". Poster session presented at 2e Journée des Enseignants de l'UMONS, Mons, Belgium.
  • Demarbaix, A., Dolimont, A., Ducobu, F., Equeter, L., Huynh, H., Leroy, C., Ozcan, A., & Rivière, E. (07 March 2018). "Manumons". Poster session presented at 1ère journée doctorale transfontalière, Reims Champagne-Ardenne , France.
  • Dutoit, C., Equeter, L., & Ducobu, F. (2018). Research Staff Mobility - Attending a Doctoral School in Paris. "Polytech-News, n°56".
    PN56.pdf (13297kb)
  • Lust, A., Steinfort, C., Rivière, E., & Ducobu, F. (01 May 2018). Engineers around the world - My experience abroad. "Polytech.News, 56".
    PN56.pdf (13297kb)
  • Demarbaix, A. (2018). "L'usinage hybride séquentiel : combinaison du fraisage et de l'usinage laser : Show Your PhD".

2017

  • Letot, C., Equeter, L., Dutoit, C., & Dehombreux, P. (2017). Updated operational reliability from degradation indicators and adaptive maintenance. In C. Volosescu (Ed.), "System Reliability" (pp. 67-91). Intech.
  • Dupont, P., & Lampman, S. A. I. (Crit. Ed.). (2017). Friction and Wear of Rolling-Element Bearings. In P. Dupont, "ASM Handbook Vol. n°18 : Friction, Lubrication & Wear Technology, 2nd Ed. 2017" (Second Ed., Reviewed & Extended, pp. 836-864). NOVELTY, United States - Ohio: ASM International. doi:10.1103/PhysRevD.84.056013
    tott2017_ASM_Dupont.pdf (731kb)
  • Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., Vivès, S., Godet, S., Henkes, T., & Filippi, E. (16 October 2017). Influence on surface characteristics of Electron Beam Melting process (EBM) by varying the process parameters. "AIP Conference Proceedings, 1896". doi:10.1063/1.5008036
    esaform17_AD_Paper.pdf (2538kb)
  • Ducobu, F., Rivière, E., & Filippi, E. (05 September 2017). Reduction of the mesh size influence on the results of a lagrangian finite element machining model. "Proceedings of the 14th International Conference on Computational Plasticity - Fundamentals and Applications, COMPLAS 2017, 2017", 226-234.
    Duco2017V_COMPLAS2017.pdf (3599kb)
  • Ducobu, F., Pedro, A., Rivière, E., Ortiz De Zarate, G., Madariaga, A., & Filippi, E. (16 June 2017). The CEL method as an alternative to the current modelling approaches for Ti6Al4V orthogonal cutting simulation. "Procedia CIRP, 58", 245-250. doi:10.1016/j.procir.2017.03.188
    Duco2017I_16thCIRP.pdf (1213kb)
  • Ozcan, A., Rivière, E., Huynh, H., Ducobu, F., Verlinden, O., & Filippi, E. (15 June 2017). Modelling of Pocket Milling Operation Considering Cutting Forces and CNC Control Inputs. "Procedia CIRP, 58", 239-244. doi:10.1016/j.procir.2017.03.187
    A Ozcan et al. 2017 (final version).pdf (1023kb)
  • De Formanoir, C., Brulard, A., Vivès, S., Guilhem, M., Prima, F., Michotte, S., Rivière, E., Dolimont, A., & Godet, S. (04 June 2017). A strategy to improve the work-hardening behavior of Ti-6Al-4V parts produced by additive manufacturing. "Materials Research Letters, 5" (4), 201-208. doi:10.1080/21663831.2016.1245681
    A strategy to improve the work hardening behavior of Ti 6Al 4V parts produced by additive manufacturing.pdf (1761kb)
  • Ducobu, F., Rivière, E., & Filippi, E. (01 June 2017). Mesh influence in orthogonal cutting modelling with the Coupled Eulerian-Lagrangian (CEL) method. "European Journal of Mechanics. A, Solids, 65", 324-335. doi:10.1016/j.euromechsol.2017.05.007
    Duco2017IV_EJMSOL.pdf (4046kb)
  • Demarbaix, A., Ducobu, F., Rivière, E., Filippi, E., & Petit, F. (2017). The Hybrid Machining of Ceramic: The choice of production stage. "Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017", 111-112.
    Euspen2017_DemarbaixFin.pdf (1074kb)
  • Ducobu, F., Rivière, E., & Filippi, E. (28 May 2017). Finite element modelling of 3D orthogonal cutting experimental tests with the Coupled Eulerian-Lagrangian (CEL) formulation. "Finite Elements in Analysis and Design, 134", 27-40. doi:10.1016/j.finel.2017.05.010
    Duco2017III_FINEL.pdf (2489kb)
  • Ducobu, F., Rivière, E., & Filippi, E. (01 May 2017). Experimental and numerical investigation of the uncut chip thickness reduction in Ti6Al4V orthogonal cutting. "Meccanica, 52", 1577-1592. doi:10.1007/s11012-016-0499-7
    Duco2016II_Mecc.pdf (1893kb)
  • Letot, C., Fleurquin, G., Lesage, A., & Dehombreux, P. (20 April 2017). An adaptive degradation-based maintenance model taking into account both imperfect adjustments and AGAN replacements. "Quality and Reliability Engineering International, TBD" (TBD). doi:10.1002/qre.2166
  • Ducobu, F., Rivière, E., & Filippi, E. (07 January 2017). On the importance of the choice of the parameters of the Johnson-Cook constitutive model and their influence on the results of a Ti6Al4V orthogonal cutting model. "International Journal of Mechanical Sciences, 122", 143-155. doi:10.1016/j.ijmecsci.2017.01.004
    Duco2017_IJMS.pdf (2494kb)
  • Rivière, E., Letot, C., Ducobu, F., Dehombreux, P., & Filippi, E. (01 January 2017). Dynamic simulation of milling operations with small diameter milling cutters: effect of material heterogeneity on the cutting force model. "Meccanica, 52" (1-2), 35-44. doi:s11012-016-0398-y
    offprint.pdf (1613kb)
  • Dupont, P. (31 October 2017). "Modern tribological trends in the Rolling-Elements Bearing's Industry in terms of Materials, Heat Treatments & Coatings". Paper presented at MS&T'17 - Materials Science & Technology Conference.
  • Dupont, P. (31 October 2017). "Common ... Let's Slide Again ! A Plain Bearings Story !" Paper presented at MS&T'17 - Materials Science & Technology Conference.
  • Dupont, P. (31 October 2017). "On the GHISLENGHIEN's Disaster, Belgium, July 2004 : A Dramatic Pipeline's Scratch !" Paper presented at MS&T'17 - Materials Science & Technology Conference.
  • Ducobu, F., Rivière, E., & Filippi, E. (01 September 2017). "REDUCTION OF THE MESH SIZE INFLUENCE ON THE RESULTS OF A LAGRANGIAN FINITE ELEMENT MACHINING MODEL". Paper presented at XIV International Conference on Computational Plasticity. Fundamentals and Applications, Barcelone, Spain.
  • Huynh, H., Rivière, E., & Verlinden, O. (09 August 2017). "Report of robotic machining measurements using a Stäubli TX200 robot: application to milling". Paper presented at ASME 2017 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE2017), Cleveland, United States - Ohio.
    ASME_ReportMeasurementsRobot.pdf (1494kb)
  • Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (27 June 2017). "Influence on surface characteristics of Electron Beam Melting process (EBM) by varying the process parameters". Paper presented at workshop additive manufacturing, Louvain-la-Neuve, UCL, Belgium.
    UMONSWorkshop_AM_UCL.pdf (2669kb)
  • Ozcan, A., Rivière, E., Huynh, H. N., Ducobu, F., Verlinden, O., & Filippi, E. (15 June 2017). "Modelling of Pocket Milling Operation Considering Cutting Forces and CNC Control Inputs". Paper presented at 16th CIRP Conference on Modelling of Machining Operations, CIRP CMMO 2017.
  • Ducobu, F., Arrazola, P., Rivière, E., Ortiz De Zarate, G., Madariaga, A., & Filippi, E. (01 June 2017). "The CEL method as an alternative to the current modelling approaches for Ti6Al4V orthogonal cutting simulation". Paper presented at 16th CIRP Conference on Modelling of Machining Operations, Cluny, France.
  • Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., Vivès, S., Godet, S., Henkes, T., & Filippi, E. (26 April 2017). "Influence on surface characteristics of electron beam melting process (EBM) by varying the process parameters". Paper presented at 20th International ESAFORM Conference on Material Forming, ESAFORM 2017.
  • Huynh, H., Verlinden, O., & Rivière, E. (2017). "Robotic Machining Simulation using a Simplified Multibody Model". Paper presented at DAAAM International Symposium on Intelligent Manufacturing and Automation, Zadar, Croatia.
    Robotic_Machining_Simulation_using_a_Simplified_Mu.pdf (1860kb)
  • Equeter, L., Letot, C., Dutoit, C., Dehombreux, P., & Serra, R. (2017). "Cutting tool life management in turning process: a new approach based on a stochastic wear process and the Cox model". Paper presented at 12ème Congrès International Pluridisciplinaire en Qualité, Sûreté de Fonctionnement et Développement Durable : QUALITA'2017, Bourges, France.
    Qualita2017.pdf (2963kb)
  • Dutoit, C., Letot, C., Equeter, L., & Dehombreux, P. (2017). "Utilisation du Contrôle Qualité dans l'Optimisation de la Maintenance". Paper presented at 12ème Congrès International Pluridisciplinaire en Qualité, Sûreté de Fonctionnement et Développement Durable : QUALITA'2017, Bourges, France.
    Qualita 2017_Dutoit.pdf (643kb)
  • Ducobu, F., Rivière, E., & Filippi, E. (04 July 2017). "Lagrangian Finite Element Machining Model with Damage: a Question of Size". Poster session presented at The 4th Researchers' Workshop of the Materials Research Institute, Mons, Belgium.
    FrançoisDucobu_4thRWofMRI.pdf (3288kb)
  • Ozcan, A., Rivière, E., Huynh, H., Ducobu, F., Filippi, E., & Verlinden, O. (04 July 2017). "Modelling of Pocket Milling Operation Considering Cutting Forces and CNC Control Inputs". Poster session presented at The 4th Researchers' Workshop of the Materials Research Institute, Mons, Belgium.
  • Equeter, L., Dehombreux, P., Ducobu, F., Rivière, E., & Serra, R. (04 July 2017). "Experimental Measurement of Wear Indicators for Estimating the Tool Remaining Useful Life". Poster session presented at 4ème Journée des Chercheurs de l'Institut Matériaux, UMONS, Belgium.
    poster--.pdf (1855kb)
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (30 May 2017). "The Hybrid Machining of Ceramic The choice of production stage". Poster session presented at euspen's 17th International Conference & Exhibition, Hanovre, Germany.
    euspen2017Pos.pdf (1138kb)
  • Ozcan, A., Rivière, E., Ducobu, F., Filippi, E., Verlinden, O., & Huynh, H. (07 March 2017). "Modélisation macroscopique d'usinage de poche en tenant compte des efforts de coupe et du contrôle". Poster session presented at Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (07 March 2017). "The Hybrid Machining of Ceramic: The choice of production stage". Poster session presented at 8e édition montoise du MdC2017, Mons, Belgium.
  • Ducobu, F., Rivière, E., & Filippi, E. (07 March 2017). "Lagrangian Finite Element Machining Model with Damage: a Question of Size". Poster session presented at Mardi des Chercheurs (MdC2017), Mons, Belgium.
    FrancoisDucobu_MdC2017.pdf (3293kb)
  • Letot, C., & Dehombreux, P. (07 March 2017). "An adaptive degradation-based maintenance model with both imperfect repairs and AGAN replacements". Poster session presented at Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.
    LetotC2017.pdf (1753kb)
  • Wattiaux, D., Verlinden, O., & Filippi, E. (07 March 2017). "Utilisation du Prototypage virtuel et rapide dans le cadre du cours de Mécanique Rationnelle". Poster session presented at Mardi des Chercheurs (MdC2017), Mons, Belgium.
    PosterWattiauxA0MdC2017.pdf (1589kb)
  • Demarbaix, A., Dolimont, A., Ducobu, F., Equeter, L., Huynh, H., Leroy, C., Ozcan, A., & Rivière, E. (07 March 2017). "Manumons: An informal research group gathering the researc activities linked to the manufacturing technologies". Poster session presented at Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.
    ManuMons.pdf (1238kb)
  • Leroy, C., Wattiaux, D., Dolimont, A., & Rivière, E. (07 March 2017). "L'impression 3D comme outil d'aide dans un cours de géométrie". Poster session presented at Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.
    2017 03 07 Poster Leroy Cédric.pdf (596kb)
  • Equeter, L., Dehombreux, P., Ducobu, F., Rivière, E., & Serra, R. (07 March 2017). "Design of Experiment: Wear Indicators for Cutting Tools: Estimate of Tool Remaining Useful Life". Poster session presented at Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.
    poster--.pdf (1848kb)
  • Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (07 March 2017). "Influence of process parameters on surface roughness of EBM". Poster session presented at Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgique, 2017, Mons, Belgium.
    AD2017_MdC2017.pdf (1540kb)
  • Huynh, H., Rivière, E., & Verlinden, O. (07 March 2017). "Robotic Machining: Development & Validation of a Robotic Machining Numerical Model in order to Optimise the Cutting Parameters". Poster session presented at Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.
    UMONS_Poster_MdC2017.pdf (2834kb)
  • Ducobu, F. (2017). "Virtual Manufacturing - Copies de présentation".
  • Ducobu, F. (2017). "Virtual Manufacturing - Notes de cours".
  • Ducobu, F. (2017). "Virtual Manufacturing - Protocoles de travaux pratiques".
  • Demarbaix, A., Dolimont, A., & Ducobu, F. (2017). Les fabrications par faisceaux ou comment la lumière participe au façonnage d'une pièce mécanique. "Polytech-News, n°55".
    PN55.pdf (3390kb)
  • Avez, C., Coussement, G., Debailleux, L., Delaunois, F., Descamps, F., Ducobu, F., Dumont, E., Lupant, D., Rivière, E., & Vitry, V. (01 June 2017). Les techniques optiques de pointe au service de l'Ingénieur. "Polytech.News, 55".
    PN55.pdf (3390kb)

2016

  • Soleimanmeigouni, I., Ahmadi, A., Arasteh Khouy, I., & Letot, C. (20 October 2016). Evaluation of the effect of tamping on the track geometry condition: A case study. "Proceedings of the Institution of Mechanical Engineers. Part F, Journal of Rail and Rapid Transit, 0" (0), 1.
  • Letot, C., Soleimanmeigouni, I., Ahmadi, A., & Dehombreux, P. (19 October 2016). An adaptive opportunistic maintenance model based on railway track condition prediction. "IFAC Proceedings Volumes, 49" (28), 120-125. doi:10.1016/j.ifacol.2016.11.021
    leto2016_AMEST.pdf (830kb)
    Letot_2016_PUB.pdf (1007kb)
  • Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (19 October 2016). Effect of HIPping (Hot Isostatic Pressing) on Electron Beam Melting Ti6Al4V parts after machining. "AIP Conference Proceedings, 1769". doi:10.1063/1.4963616
    esaform16_Dolimont.pdf (905kb)
  • Ducobu, F., Rivière, E., & Filippi, E. (01 September 2016). Application of the Coupled Eulerian-Lagrangian (CEL) method to the modeling of orthogonal cutting. "European Journal of Mechanics. A, Solids, 59", 58-66. doi:10.1016/j.euromechsol.2016.03.008
    Duco2016I_EJMSOL.pdf (2258kb)
  • Ahmadi, A., Soleimanmeigouni, I., Block, J., & Letot, C. (30 June 2016). Optimum failure management strategy for periodically inspected units with imperfect maintenance. "IFAC Proceedings Volumes, 49" (12), 799-804. doi:10.1016/j.ifacol.2016.07.872
    LetotC_MIM2016.pdf (1100kb)
    Alireza_2016_PUB.pdf (520kb)
  • Equeter, L., Letot, C., Serra, R., & Dehombreux, P. (27 June 2016). Estimate of Cutting Tool Lifespan through Cox Proportional Hazards Model. "IFAC-PapersOnLine, 49" (28), 238-243. doi:10.1016/j.ifacol.2016.11.041
    Equeter2016.pdf (548kb)
  • Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (2016). Characterization of electron beam melting process (EBM) : Capability approach. "Proceedings - ASPE/euspen 2016 Summer Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing".
    4684_acceptation.pdf (229kb)
  • Symonova, A., Ducobu, F., & Weiss, V. (01 June 2016). The mechanics of machining ultrafine-grained grade 2 Ti processed severe plastic deformtion. "Manufacturing Technology, 16", 627-633.
    Anastasyia.pdf (984kb)
  • Demarbaix, A., Ducobu, F., Rivière, E., Filippi, E., Petit, F., & Preux, N. (2016). Development of the hybrid sequential machining: laser machining and milling. "Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016".
    Euspen2016-Demarbaix.pdf (445kb)
  • Ducobu, F., Rivière, E., & Filippi, E. (01 March 2016). Material constitutive model and chip separation criterion influence on the modeling of Ti6Al4V machining with experimental validation in strictly orthogonal cutting condition. "International Journal of Mechanical Sciences, 107", 136-149. doi:10.1016/j.ijmecsci.2016.01.008
    Duco2016_IJMS.pdf (11213kb)
  • Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (31 January 2016). Characterisation of electron beam melting process on Ti6Al4V in order to guide finishing operation. "International Journal of Rapid Manufacturing, 5" (3/4).
    IJRapidM50407_Dolimont et al.pdf (1633kb)
  • Dupont, P. (31 October 2016). "Materials Curiosities over the Ages in the Rolling Elements & Sliding Bearing Industry". Paper presented at MS&T'16 - Materials Science & Technology Conference, SALT-LAKE CITY, United States - Utah.
  • Dupont, P. (31 October 2016). "The Great Names of the Strength of Materials over the Ages". Paper presented at MS&T'11 - Materials Science & Technology Conference, SALT-LAKE-CITY, United States - Utah.
  • Dupont, P. (31 October 2016). "On the Use of "Smart" Tools for Failure Detection & Prevention in Machineries". Paper presented at MS&T'16 - Materials Science & Technology Conference.
  • Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (05 July 2016). "Study of the functionalization of electron beam melting part through machining". Paper presented at 3rd Researcher's Day of the Materials Research Institute, University of Mons, Belgium.
  • Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (27 June 2016). "Characterization of electron beam melting process (EBM) : Capability approach". Paper presented at ASPE/euspen 2016 Summer Topical Meeting on Dimensional Accuracy and Surface Finish in Additive Manufacturing.
  • Leroy, C., Rivière, E., & Filippi, E. (09 June 2016). "Généralisation de la méthode de Bieterman aux cavités 2D1/2 avec îlots". Paper presented at MUGV 2016, Tours, France.
  • Verlinden, O., Huynh, H., & Rivière, E. (29 May 2016). "Modelling of flexible bodies with minimal coordinates by means of the co-rotational formulation". Paper presented at The Joint International Conference on Multibody System Dynamics, IMSD, Montréal, Canada.
    VerlindenIMSD2016.pdf (749kb)
  • Huynh, H., Rivière, E., & Verlinden, O. (29 May 2016). "Integration of machining simulation within a multibody framework: application to milling". Paper presented at The Joint International Conference on Multibody System Dynamics, IMSD, Montréal, Canada.
    HuynhIMSD2016.pdf (11197kb)
  • Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (27 May 2016). "Functionalization of Electron beam melting parts by Machining". Paper presented at workshop sur l'additive manufacturing, ULB (Bruxelles), Belgium.
    AM workshop Brussels 27MAI_V2.pdf (3234kb)
  • Rivière, E., Huynh, H., & Verlinden, O. (17 May 2016). "Time step selection for the dynamic simulation of milling operations". Paper presented at International conference on COmputational methods in Manufacturing Processes (ICOMP), Liège, Belgium.
    Rivi2016_Abstract_ICOMP.pdf (159kb)
  • Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (27 April 2016). "Effect of HIPping (Hot Isostatic Pressing) on electron beam melting Ti6Al4V parts after machining". Paper presented at 19th International ESAFORM Conference on Material Forming, ESAFORM 2016.
  • Letot, C., Soleimanmeigouni, I., Arasteh Khouy, I., Ahmadi, A., & Dehombreux, P. (2016). "Comparaison des processus gamma et Wiener pour modéliser la dégradation de géométrie de voies ferroviaires". Paper presented at Lambda Mu 20 'Maîtriser les risques dans un monde en mouvement', Saint-Malo, France.
    leto2016_LambdaMu20.pdf (1047kb)
  • Huynh, H., Rivière, E., & Verlinden, O. (15 September 2016). Milling Simulations with a 3-DOF Flexible Planar Robot. "International Journal of Industrial and Manufacturing Engineering, 10" (9), 1661-1670.
    HuynhICIPSE2016.pdf (1190kb)
  • Wattiaux, D., Verlinden, O., Rivière, E., & Renotte, C. (2016). "Virtual and rapid prototyping to develop spatial visualization skills of students in engineering". Paper presented at 44th Annual Conference of the European Society for Engineering Education (SEFI 2016), Tampere, Finland.
    PaperWattiaux.pdf (7259kb)
  • Leroy, C., Rivière, E., & Filippi, E. (2016). "Généralisation de la méthode de Bieterman aux cavités 2D1/2 avec îlots". Paper presented at MUGV 2016, Tours, France.
    Article_Leroy.pdf (639kb)
  • Ozcan, A., Rivière, E., Filippi, E., Verlinden, O., & Huynh, H. (2016). "Modélisation du mouvement dynamique d'une machine-outil à l'aide d'un logiciel de simulation dynamique multi-corps - Première approche". Paper presented at MUGV 2016, Tours, France.
    MUGV2016 - Ozcan article.pdf (1012kb)
  • Soleimanmeigouni, I., Ahmadi, A., Letot, C., Nilsson, A., & Kumar, U. (2016). "Cost-Based Optimization of Track Geometry Inspection". Paper presented at 11th World Congress of Railway Research, Milan, Italy.
    sole_WCRR2016.pdf (206kb)
  • Letot, C., Serra, R., Equeter, L., & Dehombreux, P. (2016). "Apport des modèles physiques de défaillance et des processus stochastiques pour la prédiction de la durée de vie d'outils de coupe". Paper presented at 9e Journées Nationales Fiabilité des Matériaux et des Structures - JFMS2016, Nancy, France.
    Letotc_Serrar_JFMS2016_thème_3.pdf (3968kb)
  • Leroy, C., Rivière, E., & Filippi, E. (05 July 2016). "Trajectoires curvilinéaires optimisées en longueur pour l'usinage de cavité avec îlot". Poster session presented at 3rd Researcher's Day of the Materials Research Institute, Mons, Belgium.
    2016 Poster Leroy Cédric.pdf (1010kb)
  • Ducobu, F., Rivière, E., & Filippi, E. (05 July 2016). "CEL Modelling of Ti6Al4V Orthogonal Cutting". Poster session presented at 3rd Researcher's Day of the Materials Research Institute, Mons, Belgium.
    FrançoisDucobu_3rdRDofMRI.pdf (2515kb)
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (05 July 2016). "Hybrid machining on the Y-TZP ceramic: Combination of the milling and the laser machining". Poster session presented at 3rd Researcher's Day of the Materials Research Institute, Mons, Belgium.
    poster3eme.pdf (909kb)
  • Equeter, L., Letot, C., Serra, R., & Dehombreux, P. (05 July 2016). "Simulation of Wear and Survival Analysis of Cutting Tools in Gray Cast Iron Turning". Poster session presented at Troisième Journée des Chercheurs de l'Institut Matériaux, Mons, Belgium.
    JdCMat2016_LucasEqueter_Simulation_Survival_CuttingTools.pdf (1443kb)
  • Demarbaix, A., Rivière, E., Ducobu, F., Filippi, E., Petit, F., & Preux, N. (30 May 2016). "Development of the hybrid sequential machining: Laser machining and milling". Poster session presented at 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016.
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (18 May 2016). "Concept of the hybrid machining: the laser machining and milling". Poster session presented at Matinée des chercheurs, Université de Valenciennes et du Hainaut-Cambrésis, France.
    Demarbaix_MdC2016.pdf (757kb)
  • Letot, C. (18 May 2016). "An adaptive opportunistic maintenance model based on railway track condition prediction". Poster session presented at 9ème édition de la Matinée des Chercheurs 2016 (MdC2016), Valenciennes, France.
    LetotC.pdf (932kb)
  • Equeter, L., Letot, C., Serra, R., & Dehombreux, P. (18 May 2016). "Estimate of Cutting Tools Lifetime through Cox Proportional Hazards Model". Poster session presented at Matinée des Chercheurs 2016, Valenciennes, France.
  • Ozcan, A. (18 May 2016). "Modélisation et simulation du mouvement dynamique d'une machine-outil - Première approche". Poster session presented at Matinée des chercheurs (MdC2016), Valenciennes, France.
    A Ozcan Poster A0 03.pdf (1216kb)
  • Huynh, H., Rivière, E., & Verlinden, O. (18 May 2016). "Robotic machining: Development & validation of a robotic machining numerical model in order to optimize the cutting parameters". Poster session presented at 9ème édition de la Matinée des Chercheurs 2016 (MdC2016), Valenciennes, France.
    Poster_Usinage_Robotise_HUYNH_Valenciennes.pdf (9960kb)
  • Dolimont, A., Rivière, E., & Filippi, E. (18 May 2016). "Study of the functionalization of electron beam melting part through machining". Poster session presented at Matinée des chercheurs, Valenciennes, Université de Valenciennes et du Hainaut Cambrésis, France.
    AD2016_MdC2016.pdf (1275kb)
  • Spitaels, L., & Marlière, R. (2016). "Mur d'escalade déroulant Treadwall : Projet de construction des machines".
  • Potier, N., Tsongo, J., & Ducobu, F. (2016). Des cours aux concours... nos étudiants se distinguent: Paper Gun. "Polytech-News, n°54".
    PN54.pdf (2966kb)
  • Ducobu, F., & Equeter, L. (2016). Le compagnonnage à la FPMs. "Polytech-News, n°54".
    PN54.pdf (2966kb)
  • Cubo Soto, J., & Ducobu, F. (2016). Développement du projet professionnel: de 3ème bachelier à Ingénieur civil Mécanicien. "Polytech-News, n°54".
    PN54.pdf (2966kb)
  • Cherdon, G., & Ducobu, F. (2016). Des cours aux concours... nos étudiants se distinguent: Eurobot. "Polytech-News, n°54".
    PN54.pdf (2966kb)
  • Fleurquin, G., Letot, C., & Ducobu, F. (2016). La maintenance dans le monde ferroviaire : un pari d'avenir. "Polytech-News, n°53".
    PN53.pdf (3999kb)
  • Ducobu, F. (2016). Un Ingénieur de la FPMs dans l'écurie Ferrari en F1. "Polytech-News, n°53".
    PN53.pdf (3999kb)
  • Iscaro, A., Truffaut, J.-L., & Ducobu, F. (2016). Le banc moteur, un outil indispensable pour les étudiants participant au concours Shell Eco-marathon. "Polytech-News, n°53".
    PN53.pdf (3999kb)
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (2016). "La nuit des chercheurs: L'usinage hybride: Combinaison séquentielle fraisage et usinage laser".
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (2016). "Ma thèse en 180 secondes: L'usinage hybride : Combinaison de deux procédés de fabrication par enlèvement de matière".
    Hybrid180.pdf (318kb)

2015

  • Letot, C., Serra, R., Dossevi, M., & Dehombreux, P. (16 December 2015). Cutting tools reliability and residual life prediction from degradation indicators in turning process: A case study involving four approaches. "International Journal of Advanced Manufacturing Technology, 86" (1), 495-506. doi:10.1007/s00170-015-8158-z
  • Letot, C., Dersin, P., Pugnaloni, M., Dehombreux, P., Fleurquin, G., Douziech, C., & La-Cascia, P. (15 October 2015). A data driven degradation-based model for the maintenance of turnouts: a case study. "IFAC Proceedings Volumes, 48" (21), 958-963. doi:10.1016/j.ifacol.2015.09.650
  • Ducobu, F., Rivière, E., & Filippi, E. (27 July 2015). Experimental contribution to the study of the Ti6Al4V chip formation in orthogonal cutting on a milling machine. "International Journal of Material Forming, 8" (3), 455-468. doi:10.1007/s12289-014-1189-4
    Duco2014I_IJFO.pdf (4056kb)
  • Ducobu, F., Pedro, A., Rivière, E., & Filippi, E. (11 June 2015). Finite Element Prediction of the Tool Wear Influence in Ti6Al4V Machining. "Procedia CIRP, 31", 124-129. doi:10.1016/j.procir.2015.03.056
    Duco2015IV_15thCIRP.pdf (1382kb)
  • Rivière, E., Letot, C., Ducobu, F., & Filippi, E. (17 April 2015). Uncertainty management of cutting forces parameters and its effects on machining stability. "Key Engineering Materials, 651-653", 1165-1170. doi:10.4028/www.scientific.net/KEM.651-653.116
    Rivi2015.pdf (1904kb)
  • Ducobu, F., Pedro, A., Rivière, E., & Filippi, E. (15 April 2015). Comparison of several behaviour laws intended to produce a realistic Ti6Al4V chip by finite elements modelling. "Key Engineering Materials, 651-653", 1197-1203. doi:10.4028/www.scientific.net/KEM.651-653.1197
    Duco2015II_Esaform.pdf (2426kb)
  • Mahamoud, N. Y., Dehombreux, P., Pirlot, M., & Robleh, H. E. (01 April 2015). Évaluation multicritère d'aide à la décision pour le choix d'une politique de maintenance industrielle. "Revue Universitaire de Djibouti, 1" (8), 1-9.
  • Ducobu, F., Rivière, E., & Filippi, E. (01 April 2015). On the introduction of adaptive mass scaling in a finite element model of Ti6Al4V orthogonal cutting. "Simulation Modelling Practice and Theory, 53", 1-14. doi:10.1016/j.simpat.2015.02.003
    Duco2015_SIMPAT.pdf (1798kb)
  • Lesage, A., & Dehombreux, P. (01 March 2015). Simulation of Manufacturing Processes Subject to Maintenance and Quality Control: Sensitivity Analysis and Numerical Example. "International Journal of Mechanical Engineering and Automation, 2" (3), 119-126.
    IJMEA-E20141218-2_Arnaud Lesage.pdf (1292kb)
    Vol. 2, No. 3, 2015, IJMEA.pdf (5175kb)
  • Letot, C., Dehombreux, P., Rivière, E., Fleurquin, G., & Lesage, A. (01 March 2015). A degradation model for maintenance improvement in respect of cost and availability. "Journal of Quality in Maintenance Engineering, 21" (1), 55 - 69. doi:10.1108/JQME-01-2013-0001
  • Kouroussis, G., Dehombreux, P., & Verlinden, O. (01 January 2015). Vehicle and powertrain dynamics analysis with an automatic gearbox. "Mechanism and Machine Theory, 83", 109-124.
    KOU2015c - MAMT2377.pdf (1505kb)
  • Dolimont, A., Michotte, S., De Formanoir, C., Rivière, E., Ducobu, F., Godet, S., & Filippi, E. (02 December 2015). "L'impact des traitements thermiques et CIC sur la microstructure et les propriétés mécaniques des pièces en TA6V par EBM et contrôle géométrique du procédé pour guider l'usinage". Paper presented at A3TS: POST FABRICATION ADDITIVE : QUELS TRAITEMENTS DE FINITION ?, UTBM Sevenans (90), France.
    UMONS_SIRRIS_A3TS.pdf (3241kb)
  • Dupont, P. (31 October 2015). "On the Collapse of the MONS 2015's EU Capital of the Culture inauguration timber structure : "The Passenger"". Paper presented at MS&T'15 - Materials Science & Technology Conference, COLOMBUS, United States - Ohio.
  • Dupont, P. (31 October 2015). "A General Discussion on the Selection of Safety Factors in Industrial Design". Paper presented at MS&T'15 - Materials Science & Technology Conference, COLUMBUS, United States - Ohio.
  • Ducobu, F., Arrazola, P., Rivière, E., & Filippi, E. (01 June 2015). "Finite Element Prediction of the Tool Wear Influence in Ti6Al4V Machining". Paper presented at 15th CIRP Conference on Modelling of Machining Operations, Karlsruhe, Germany.
  • Ducobu, F., & Rivière, E. (26 May 2015). "On going topics in modelling of machining". Paper presented at Les nouvelles tendances et techniques d'usinage pour le secteur aérospatial, Wavre, Belgium.
  • Ducobu, F., Arrazola, P., Rivière, E., & Filippi, E. (01 April 2015). "Comparison of several behaviour laws intended to produce a realistic Ti6Al4V chip by finite elements modelling". Paper presented at Esaform 2015, Graz, Austria.
  • Rivière, E., Letot, C., Ducobu, F., & Filippi, E. (01 April 2015). "Uncertainty management of cutting forces parameters and its effects on machining stability". Paper presented at 18th International ESAFORM Conference on Material Forming, ESAFORM 2015.
  • Lesage, A., & Dehombreux, P. (2015). "Optimisation conjointe des stratégies de maintenance et de contrôle qualité : modèle intégrant la maintenance imparfaite". Paper presented at 11ème Congrès International de Génie Industriel (CIGI2015), Québec, Canada.
    CIGI2015_Arnaud Lesage_version finale.pdf (1545kb)
  • Letot, C., & Dehombreux, P. (2015). "Modèle de maintenance adaptative imparfaite pour des équipements sujets à la dégradation". Paper presented at 11ème Congrès International de Génie Industriel (CIGI2015), Québec, Canada.
    letotc_CIGI2015_VF.pdf (1071kb)
  • Mahamoud, N. Y., Dehombreux, P., Pirlot, M., & Robleh, H. E. (2015). "Maintenance policy selection from a limited number of decision criteria. A case study: an application of the ELECTRE II method for selecting the best maintenance policy for hydraulic couplings". Paper presented at 11ème Congrès International de Génie Industriel (CIGI2015), Québec, Canada.
    maha2015a.pdf (699kb)
  • Letot, C., Dersin, P., Pugnaloni, M., Dehombreux, P., Fleurquin, G., Douziech, C., & La-Cascia, P. (2015). "A data driven degradation-based model for the maintenance of turnouts: a case study". Paper presented at 9th IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes SAFEPROCESS'15, Paris, France.
    letotc_0180_final.pdf (1924kb)
  • Lesage, A., & Dehombreux, P. (2015). "Simulation de Procédés de Fabrication Soumis à la Maintenance et au Contrôle Qualité". Paper presented at QUALITA'2015-11ème Congrès International Pluridisciplinaire en Qualité, Sûreté de Fonctionnement et Développement Durable, Nancy, France.
    150113_Qualita' 2015_Arnaud Lesage.pdf (1024kb)
  • Ducobu, F., Pedro, A., Rivière, E., & Filippi, E. (30 June 2015). "A first step to study numerically the tool wear influence in Ti6Al4V orthogonal cutting". Poster session presented at 2nd Researcher's Day of the Materials Research Institute, Mons, Belgium.
    FrançoisDucobu_2ndRDofMRI.pdf (1068kb)
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (30 June 2015). "LAMAC: Usinage laser sur de la céramique « crue »". Poster session presented at The 2nd Researcher's Day of the Materials Research Institute, Mons, Belgium.
  • Dolimont, A., Rivière, E., & Filippi, E. (30 June 2015). "Metrological analysis of electron beam melting process (EBM)". Poster session presented at 2nd Researcher's Day of the Materials Research Institute, Mons, Belgium.
  • Lesage, A. (10 March 2015). "Simulation à Événements Discrets - Optimiser la Maintenance et le Contrôle Qualité". Poster session presented at 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium.
    MDC2015_UMONS_Lesage.pdf (844kb)
  • Dehombreux, P. (10 March 2015). "Decision support model for maintenance policy selection issue". Poster session presented at Matinée des Chercheurs 8, Umons-Mons, Belgium.
  • Fleurquin, G., & Dehombreux, P. (10 March 2015). "Simulation à événements discrets : Optimiser la maintenance et la production". Poster session presented at 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium.
    MDC2015_UMONS_Fleurquin.pdf (1220kb)
  • Ducobu, F., Pedro, A., Rivière, E., & Filippi, E. (10 March 2015). "A numerical model to study the tool wear influence in Ti6Al4V orthogonal cutting". Poster session presented at Matinée des chercheurs (MDC2015), Mons, Belgium.
    FrancoisDucobu_MdC2015.pdf (1068kb)
  • Letot, C. (10 March 2015). "A data driven degradation-based model for the maintenance of turnouts: a case study". Poster session presented at 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium.
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (10 March 2015). "Comparaison de deux technologies de fabrication dans la céramique dentaire : usinage laser et micro-fraisage". Poster session presented at 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium.
    MdC2015.pdf (928kb)
  • Leroy, C., Rivière, E., & Filippi, E. (10 March 2015). "Résoudre l'équation de Poisson pour générer des trajectoires d'usinage fluides. Cas des cavités avec îlot". Poster session presented at 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium.
    2015 MDC.pdf (813kb)
    2015 MDC.pdf (813kb)
  • Dolimont, A., Rivière, E., & Filippi, E. (10 March 2015). "Characterization of electron beam melting process (EBM) in order to enhance finishing operations". Poster session presented at 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium.
  • Boulvain, J., VanParys, L., Rivière, E., Ducobu, F., & Legrain, H. (02 March 2015). "Improvement of underground investigation techniques: a soil model coupling Drucker-Prager & ALE". Poster session presented at Matinée des chercheurs (MDC2015), Mons, Belgium.
  • Spitaels, L. (2015). "Étude d'un case de différentiel à glissement limité Torsen de type C : Projet de Technologie des Fabrications Mécaniques".
  • Ducobu, F., Brugmans, M., D'Hondt, Q., Lepine, A., Potier, N., Poulet, N., Thuin, M., & Tsongo, J. (2015). Les projets de l'étudiant mécanicien. "Polytech-News, n°52".
    PN52.pdf (5160kb)
  • Ducobu, F., Dupont, P., & Dupont, L. (2015). Un petit air de Tintin en Mécanique. "Polytech-News, n°52".
    PN52.pdf (5160kb)
  • Descamps, F., Ducobu, F., & Demarbaix, A. (2015). MdC 2015 : un magicien polytechnicien gagne le Premier Prix Show Your PhD. "Polytech-News, n°52".
    PN52-Magicien.pdf (832kb)
  • Ducobu, F. (2015). Le PerSciF-Polytech, au coeur du quotidien des scientifiques de la Faculté. "Journal de l'AIMs, Juin 2015".
    Journal_juin_2015.pdf (2317kb)
  • Ducobu, F. (2015). La Matinée des Chercheurs (MdC) 2015. "Journal de l'AIMs, Juin 2015".
    Journal_juin_2015.pdf (2317kb)
  • Filippi, E., & Lesage, A. (2015). "Conception d'un nouveau véhicule de 3e génération 'Urban Concept' - Concours Shell Eco-Marathon, Reportage Journal Télévision RTL-TVI".
  • Filippi, E., & Lesage, A. (2015). "Conception d'un nouveau véhicule de 3e génération 'Urban Concept' - Concours Shell Eco-Marathon, Reportage Journal Télévisé de la RTBF".
  • Filippi, E., Verlinden, O., & Chariot, C. (2015). "'Eurobot 2015: Robomovies - Ultime répétition des robots, Reportage Journal Télévision RTBF".
  • Filippi, E., Verlinden, O., & Chariot, C. (2015). "Eurobot 2015: Robomovies - Ultime répétition des robots, RTBF Info Régions".
  • Filippi, E., Verlinden, O., & Chariot, C. (2015). "Eurobot 2015: Robomovies - Ultime répétition des robots, Reportage Journal Télévisé TéléMB'".
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (2015). "Les trajectoires en usinage laser: Modèle thermique pour controller le taux de matière ablaté".

2014

  • Letot, C., Dehombreux, P., & Serra, R. (01 September 2014). Estimer la durée de vie des plaquettes d'usinage à partir de données de dégradation. "Essais & Simulations sciences et techniques en environnement pour les laboratoires et l'industrie, 118" (1), 24-28.
  • Ducobu, F., Rivière, E., & Filippi, E. (01 April 2014). Numerical contribution to the comprehension of saw-toothed Ti6Al4V chip formation in orthogonal cutting. "International Journal of Mechanical Sciences, 81", 77-87. doi:10.1016/j.ijmecsci.2014.02.017
    Duco2014_IJMS.pdf (4509kb)
  • Dupont, P. (01 November 2014). "On the use of Contact Stress Simulation as a Relevant Tool for Explaining Superficial (Fatigue) Failure". Paper presented at MS&T'14 - Materials Science & Technology Conference, PITTSBURGH, United States - Pennsylvania.
  • Dupont, P. (31 October 2014). "Rapid Prototyping as Testing Tool for Improving the Mechanical Performances of Prototyped Polymer Structural Parts". Paper presented at MS&T'14 - Materials Science & Technology Conference, PITTSBUGH, United States - Pennsylvania.
  • Dupont, P. (31 October 2014). "Endoscopy as a Tool for Failures Prevention in Machineries". Paper presented at MS&T'14 - Materials Science & Technology Conference.
  • Dupont, P. (31 October 2014). "On the Gear Failure Modes Prevention & their Estimations in Industrial Designs". Paper presented at MS&T'14 - Materials Science & Technology Conference.
  • Leroy, C., Rivière, E., & Filippi, E. (16 October 2014). "Trajectoires curvilinéaires pour l'usinage de cavités avec îlot: une première approche". Paper presented at MUGV 2014, Clermont-Ferrand, France.
  • Martinez, A., Letot, C., Serra, R., & Dehombreux, P. (2014). "Maîtrise de l'estimation de l'usure des plaquettes de coupe en usinage". Paper presented at MUGV 2014, Clermont-Ferrand, France.
  • Leroy, C., Rivière, E., & Filippi, E. (2014). "TRAJECTOIRES CURVILINEAIRES POUR L'USINAGE DE CAVITES AVEC ÎLOT: UNE PREMIERE APPROCHE". Paper presented at MUGV 2014, Clermont-Ferrand, France.
    LEROY_def.pdf (767kb)
  • Demarbaix, A., Ducobu, F., Rivière, E., Filippi, E., Petit, F., & Preux, N. (2014). "TRAJECTORIES IN LASER MACHINING CERAMICS: THERMAL MODEL TO CONTROL MATERIAL REMOVE RATE". Paper presented at Eleventh International Conference on High Speed Machining, Prague, Czechia.
    14025_Demarbai_HSM2014.pdf (2507kb)
  • Dolimont, A., Rivière, E., & Filippi, E. (2014). ANALYSIS OF MACHINING CONFIGURATIONS WITH BALL-END MILLS IN ORDER TO FINISH PARTS MADE BY EBM AND COMPARISON WITH NUMERICAL MODEL. "Proceedings of the eleventh international conference on high speed machining (HSM 2014)".
    14043_Dolimont_finalFT_NS.pdf (980kb)
  • Kouroussis, G., Alexandrou, G., Dolimont, A., & Verlinden, O. (2014). "Investigating the effect of wheel flat on railway traffic vibration using a numerical model". Paper presented at 21st International Congress on Sound and Vibration (ICSV21), Beijing, China.
    KOU2014k - ICSV21_p59.pdf (595kb)
  • Kouroussis, G., Dehombreux, P., & Verlinden, O. (2014). "Multibody modelling of an automatic gearbox: calculation of acceleration performance". Paper presented at 3rd Joint International Conference on Multibody System Dynamics and the 7th Asian Conference on Multibody Dynamics, Busan, South Korea.
    KOU2014h - IMSD2014.pdf (351kb)
  • Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (02 July 2014). "Modèle thermique par éléments finis de différentes trajectoires en usinage laser". Poster session presented at 1st Researcher's Day of the Materials Research Institute, Mons, Belgium.
    The 1st Researchers Day of the Materials Research Institute.pdf (854kb)
  • Ducobu, F., Rivière, E., & Filippi, E. (02 July 2014). "Experimental contribution to the study of the Ti6Al4V chip formation in orthogonal cutting on a milling machine". Poster session presented at 1st Research Day of the Materials Research Institute, Mons, Belgium.
    FrançoisDucobu_1stRDofMRI.pdf (4729kb)
  • Dolimont, A., Rivière, E., & Filippi, E. (02 July 2014). "Analysis of machining configurations with ball-end mills in order to finish parts made by EBM and comparison with numerical model". Poster session presented at 1st Researcher's Day of the Materials Research Institute, Mons, Belgium.
  • Leroy, C., Rivière, E., & Filippi, E. (01 July 2014). "Trajectoires curvilinéaires pour l'usinage de cavités avec îlot: une première approche". Poster session presented at Journée des chercheurs de l'Institut Matériaux, Mons, Belgium.
    2014 JDC court.pdf (638kb)
  • Boulvain, J. (2014). "A contribution to the simulation of soil testing". Unpublished master thesis, Université de Mons. Jury: VanParys, L. (Promotor), & Rivière, E. (Promotor).
  • Rivière, E., Filippi, E., & Dehombreux, P. (2014). "Construction des machines et procédés de fabrication : Notes de cours".
    GMEC034.pdf (20197kb)

2013

  • Ducobu, F., Rivière, E., & Filippi, E. (25 July 2013). Chip Formation in Micro-cutting. "Journal of Mechanics Engineering and Automation, 3", 441-448.
    Duco2013I_JMEA.pdf (687kb)
  • Ducobu, F., Rivière, E., & Filippi, E. (13 June 2013). Influence of the Material Behavior Law and Damage Value on the Results of an Orthogonal Cutting Finite Element Model of Ti6Al4V. "Procedia CIRP, 8", 378-383. doi:10.1016/j.procir.2013.06.120
    Duco2013_14thCIRP.pdf (1097kb)
  • Rivière, E., Filippi, E., & Dehombreux, P. (21 April 2013). Numerical simulation of machining operations on flexible parts. "Key Engineering Materials, 554-557", 1984-1991. doi:10.4028/www.scientific.net/KEM.554-557.1984
    r06 numerical simulation of machining operation on flexible parts.pdf (2899kb)
  • Dupont, P. (30 November 2013). "An Analysis of the Through Fracture of a Paper Pulper's Shaft Working under Corrosion Fatigue & Shocks !" Paper presented at MS&T'13 - Materials Science & Technology Conference, MONTREAL, Canada.
  • Dupont, P. (31 October 2013). "An Analysis of the Superficial Fatigue Failure of the Main Plain Bearing of a 250 [kW] KAPLAN's Water plant Turbine". Paper presented at MS&T'13 - Materials Science & Technology Conference, MONTREAL, Canada.
  • Ducobu, F., Rivière, E., & Filippi, E. (01 June 2013). "Influence of the Material Behavior Law and Damage Value on the Results of an Orthogonal Cutting Finite Element Model of Ti6Al4V". Paper presented at CIRP Conference on Modeling of Machining Operations, Turin, Italy.
  • Rivière, E., & Filippi, E. (18 April 2013). "Approche macroscopique de l'usinage des métaux : techniques expérimentales et apport de la simulation". Paper presented at Journée thématique: 'L'usinage des matériaux: de la compréhension des mécanismes aux applications', Mons, Belgium.
  • Ducobu, F., Rivière, E., & Filippi, E. (18 April 2013). "Approche mésoscopique pour l'étude numérique et expérimentale des mécanismes de coupe macroscopique et microscopique". Paper presented at Journée thématique: 'L'usinage des matériaux: de la compréhension des mécanismes aux applications', Mons, Belgium.
    81_Ducobu_François_14thCIRP_Presentation.pdf (1085kb)
  • Ducobu, F., Rivière, E., & Filippi, E. (26 March 2013). "A Lagrangian Model to Produce Saw-toothed Macro-chip and to Study the Depth of Cut Influence on its Formation in Orthogonal Cutting of Ti6Al4V". Paper presented at SIMULIA Academic Seminar 2013, Mons, Belgium.
  • Chariot, C., Filippi, E., & Verlinden, O. (2013). "CPG tuning using sensory feedback for walking applications". Paper presented at ECCOMAS Multibody Dynamics 2013, Zagreb, Croatia.
  • Ducobu, F., Rivière, E., & Filippi, E. (26 September 2013). "Experimental contribution to the comprehension of Ti6Al4V saw-toothed chip formation in orthogonal cutting". Poster session presented at Tenth International Conference on High Speed Machining, Darmstadt, Germany.
    DucobuF_Poster_HSM_Conference.pdf (817kb)
  • Leroy, C., Rivière, E., & Filippi, E. (12 March 2013). "Optimisation de l'usinage de cavités par fraisage". Poster session presented at Matinée des chercheurs ( MDC'2013), Mons, Belgium. doi:10.1088/1748-0221/5/03/T03001
    2013 MDC 2.pdf (820kb)
  • Dolimont, A., Rivière, E., & Filippi, E. (12 March 2013). "Finition des pièces mécaniques à la sortie d'une production additive". Poster session presented at 7ème édition de la Matinée de Chercheurs, Mons, Belgium.
  • Ducobu, F., Rivière, E., & Filippi, E. (06 March 2013). "Experimental contribution to the comprehension of Ti6Al4V saw-toothed chip formation mechanisms in orthogonal cutting". Poster session presented at Matinée des Chercheurs 2013, Mons, Belgium.
    FrançoisDucobu_MdC2013.pdf (6502kb)
  • Letot, C. (2013). "Maintenance prévisionnelle d'équipements industriels basée sur la modélisation, l'estimation et la simulation de lois de dégradation". Unpublished doctoral thesis, Université de Mons. Jury: Dehombreux, P. (Promotor), Pirlot, M., Verlinden, O., Serra, R., Riane, F., Labeau, P.-E., Rivière, E., & Pintelon, L.
    Thèse_Letotc_DI.pdf (1102kb)
  • Ducobu, F. (2013). "Contribution à l'étude de la formation du copeau de Ti6Al4V en coupe orthogonale. Approches numérique et expérimentale pour la compréhension des mécanismes de coupe macroscopique et microscopique". Unpublished doctoral thesis, Université de Mons. Jury: Filippi, E. (Promotor), Rivière, E. (Promotor), Datoussaïd, S., D'Acunto, A., Massart, T. J., Pantalé, O., Ponthot, J.-P., & Stas, A.
  • Ducobu, F. (2013). "Notes de laboratoire de SolidWorks 2013 (Dessin Technique) : TP2".
    Labo2.pdf (6772kb)
  • Ducobu, F. (2013). "Notes de laboratoire de SolidWorks 2013 (Dessin Technique) : TP1".
    Labo1.pdf (8703kb)
  • Ducobu, F. (2013). Contribution à l'étude de la formation du copeau de Ti6Al4V en coupe orthogonale. Approches numérique et expérimentale pour la compréhension des mécanismes de coupe macroscopique et microscopique. "Polytech News, n° 49".
    PN49.pdf (7017kb)

2012

  • Dupont, P. (31 October 2012). "Fretting Corrosion induced Fracture of a floating Bearing base Plate in a 250 Tons Yankee Paper Drum". Paper presented at MS&T'12 - Materials Science & Technology Conference, COLOMBUS, United States - Ohio.
  • Dupont, P. (31 October 2012). "An Analysis of the Main Shaft Failure of an Impact Stones Crusher". Paper presented at MS&T'12 - Materials Science & Technology Conference, COLUMBUS, United States - Ohio.
  • Dupont, P. (31 October 2012). "A Wear Model Dedicated to the Estimates of the Overall Lifetime of Profiled Power Screw Drives". Paper presented at MS&T'12 - Materials Science & Technology Conference, COLUMBUS, United States - Ohio.
  • Ducobu, F., Rivière, E., & Filippi, E. (01 May 2012). "Chip Formation in Microcutting". Paper presented at 9th National Congress on Theoretical and Applied Mechanics (NCTAM2012), Brussels, Belgium.
  • Ducobu, F., Rivière, E., & Filippi, E. (14 March 2012). "Dynamic simulation of the micro-milling process including minimum chip thickness". Paper presented at 15th Conference of the European Scientific Association on Material Forming, ESAFORM 2012.
  • Letot, C., & Dehombreux, P. (2012). "Actualized reliability model based on degradation data and maintenance optimization". Paper presented at 2nd IFAC Workshop on Advanced Maintenance Engineering, Services and Technology (A-MEST'12), Sevilla, Spain.
    letotc_AMEST_paper6.pdf (458kb)
  • Letot, C., Serra, R., & Dehombreux, P. (2012). "Fiabilité actualisée de plaquettes d'usinage afin d'estimer leur durée de vie à partir de données de dégradation". Paper presented at Lambda Mu 18 'La maîtrise des risques des systèmes complexes', Tours, France.
    letotc_serrar_LM18_final.pdf (757kb)
  • Lesage, A., & Dehombreux, P. (2012). "Maintenance and Quality Control: A First Methodological Approach for Maintenance Policy Optimization". Paper presented at 14th IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2012), Bucharest, Romania.
    INCOM12_final paper.pdf (1174kb)
  • Letot, C., & Dehombreux, P. (2012). "Dynamic reliability degradation-based models and maintenance optimization". Paper presented at 9th National Congress on Theoretical and Applied Mechanics (NCTAM2012), Brussels, Belgium.
    letotc_NCTAM2012.pdf (1346kb)
  • Ducobu, F., Rivière, E., & Filippi, E. (2012). "Chip Formation in Micro-cutting". Paper presented at 9th National Congress on Theoretical and Applied Mechanics (NCTAM2012), Brussels, Belgium.
    Duco2012II_NCTAM2012.pdf (2699kb)
  • Chariot, C., Filippi, E., & Verlinden, O. (2012). "Simulation framework of modular robots using EasyDyn". Paper presented at 9th National Congress on Theoretical and Applied Mechanics (NCTAM2012), Brussels, Belgium.
    Chariot_NCTAM.pdf (997kb)
  • Lesage, A., & Dehombreux, P. (2012). "Simulation of manufacturing processes subject to maintenance actions and quality control". Paper presented at 9th National Congress on Theoretical and Applied Mechanics (NCTAM2012), Brussels, Belgium.
    NCTAM 2012_final paper_Arnaud Lesage.pdf (1069kb)
  • Rivière, E., Brunée, N., & Losseau, M. (12 June 2012). La coopération au développement par la pratique. "Polytech.News, 47".
  • Avau, J., & Rivière, E. (12 June 2012). Education et solidarité: ingénieurs et citoyens, ils passent à l'action. "Polytech.News, 47".

2011

  • Dehombreux, P., Fleurquin, G., & Riane, F. (2011). Optimisation of Maintenance Policies through Simulation. In "Maintenance Modelling and Applications" (pp. 377-396). Det Norske Veritas.
    C4_OptimMaint_RDF.pdf (692kb)
  • Dehombreux, P. (22 July 2011). Evaluation of the Performance of Infrared Thermography for on-Line Condition Monitoring of Rotating Machines. "Engineering, 3" (11), 1-11. doi:10.4236/eng.2011.310128
  • Ducobu, F., Rivière, E., & Filippi, E. (12 May 2011). A Lagrangian FEM Model to Produce Saw-toothed Macro-chip and to Study the Depth of Cut Influence on its Formation in Orthogonal Cutting of Ti6Al4V. "Advanced Materials Research, 223", 3-11. doi:10.4028/www.scientific.net/AMR.223.3
    Duco2011.pdf (3186kb)
  • Kilundu Y'E Bondo, B., Chiementin, X., Duez, J., & Mba, D. (2011). Cyclostationarity of Acoustic Emissions (AE) for monitoring bearing defects. "Mechanical Systems and Signal Processing". doi:10.1016/j.ymssp.2011.01.020
  • Beys, A. (01 January 2011). Reconstruction en 3D des plans caractéristiques de décors architecturaux peints dans les tableaux de la Renaissance. "Quadrature: Magazine de Mathématiques Pures et Appliquées, 79", 9-18.
    Quadrature_Beys.pdf (794kb)
  • Dupont, P. (31 October 2011). "An Analysis of the Premature Failure of an Acid Bath Mixer Shaft subjected to Corrosion Fatigue". Paper presented at MS&T'11 - Materials Science & Technology Conference, COLOMBUS, United States - Ohio.
  • Ducobu, F., Rivière, E., & Filippi, E. (01 June 2011). "A Lagrangian FEM Model to Produce Saw-toothed Macro-chip and to Study the Depth of Cut Influence on its Formation in Orthogonal Cutting of Ti6Al4V". Paper presented at CIRP conference on modelling of machining operations, Sintra, Portugal.
  • Rivière, E., Filippi, E., & Dehombreux, P. (07 April 2011). "Experimental study of parameter-dependent analytical cutting force model". Paper presented at Matinée des chercheurs, UMONS, Belgium.
  • Letot, C., Dehombreux, P., Fleurquin, G., & Rivière, E. (2011). "Roller bearings lifetime under different load conditions by a semi-Markovian approach". Paper presented at 41st ESReDA Conference Advances in Reliability-based Maintenance Policies, La Rochelle, France.
    letotc_article_ESReDA.pdf (606kb)
  • Chariot, C., Filippi, E., & Verlinden, O. (2011). "Multibody Simulation of Modular Robots: Performances and feasibility of simplified 6-legged and caterpillar gaits". Paper presented at ECCOMAS Multibody Dynamics 2011, UCL, Brussels, Belgium.
  • Rivière, E., Filippi, E., & Dehombreux, P. (2011). "Experimental investigation of parameter-dependent analytical cutting force models for the simulation of the milling process". Paper presented at Esaform 2011, Queen's University, Belfast, Unknown/unspecified. doi:10.1063/1.3589577
    esaform126.pdf (171kb)
    15 Experimental investigation of parameter-dependent analytical cutting force models for the simulation of the milling process.pdf (363kb)
  • Lesage, A. (22 March 2011). "Planification d'actions de maintenance basée sur les mesures qualité". Poster session presented at Matinée des Chercheurs 2011, Université de Mons, Belgium.
    MdC2011_Arnaud Lesage.pdf (673kb)
  • Chariot, C., Filippi, E., & Verlinden, O. (22 March 2011). "Locomotion Simulation of Self-Reconfigurable Robots". Poster session presented at Matinée des Chercheurs, UMons, Belgium.
  • Ducobu, F., Rivière, E., & Filippi, E. (22 March 2011). "Simulation de la formation d'un copeau dentelé de Ti6Al4V en coupe orthogonale par la méthode aux éléments finis". Poster session presented at 6ème édition de la Matinée des Chercheurs (MDC 2011), Mons, Belgium.
    FrançoisDucobu_MdC11_Comp.pdf (3526kb)
  • Dehombreux, P., & Fleurquin, G. (22 March 2011). "Optimisation de la maintenance: Cas de lignes continues de production d'acier". Poster session presented at 6ème édition de la Matinée des Chercheurs (MDC 2011), Mons, Belgium.
    MDC2011_GF.pdf (1013kb)
  • Leroy, C. (22 March 2011). "Matlab, un outil pour contextualiser la géométrie". Poster session presented at 6ème édition de la Matinée des Chercheurs (MDC 2011), Mons, Belgium.
    2011 MDC mars 01 déf.pdf (676kb)
  • Ducobu, F. (2011). "Notes de laboratoire de SolidWorks 2011 (Dessin Technique) : TP2".
  • Ducobu, F. (2011). "Notes de laboratoire de SolidWorks 2011 (Dessin Technique) : TP1".
  • Vanderstappen, X., & Rivière, E. (22 November 2011). Le projet Icare. "Polytech.News, 46".
  • Ducobu, F., & Letot, C. (2011). I-CARE 333 : une autre idée de la mobilité. "Polytech News, n°46".
    PN46.pdf (5223kb)
  • Tam, E., El Hiki, L., Dumont, E., & Rivière, E. (10 June 2011). Pôles d'attraction internationale. "Polytech.News, 44".
  • Rivière, E. (15 March 2011). Sixième édition de la matinée des chercheurs. "Polytech.News, 45".
  • Ducobu, F. (2011). "Rapport du 4ème Comité d'accompagnement de Thèse - Étude du phénomène de coupe en micro-fraisage par enlèvement de copeaux".
  • Ducobu, F. (2011). "Rapport du 3ème Comité d'accompagnement de Thèse - Étude du phénomène de coupe en micro-fraisage par enlèvement de copeaux : Épreuve de confirmation".

2010

  • Kilundu Y'E Bondo, B., Dehombreux, P., & Chiementin, X. (10 December 2010). Tool wear monitoring by machine learning techniques and singular spectrum analysis. "Mechanical Systems and Signal Processing, 25" (1), 400-415.
    MSSPSSA_tool.pdf (1293kb)
  • Chiementin, X., Kilundu Y'E Bondo, B., Dron, J.-P., Dehombreux, P., & Debray, K. (12 November 2010). Effect of cascade methods on vibration defects detection. "Journal of Vibration and Control, 17" (4), 567-577. doi:10.1177/1077546310362447
    JVC 362447.pdf (1356kb)
  • Ducobu, F., Rivière, E., & Filippi, E. (01 December 2010). "An ALE Model to Study the Depth of Cut Influence on Chip Formation in Orthogonal Cutting". Paper presented at Eighth International Conference on High Speed Machining, Metz, France.
  • Dupont, P. (31 October 2010). "A General Review of the Superficial Fatigue Failure Modes met in Rolling Element Bearing Technology". Paper presented at ASME-STLE Joint Tribology Conference, SAN FRANCISCO, United States - California.
  • Ducobu, F., Rivière, E., & Filippi, E. (15 March 2010). "Orthogonal Cutting Simulations with Abaqus/Explicit - Current results". Paper presented at Simulia Academic Seminar 2010, Leuven, Belgium.
  • Dupont, P. (2010). A Combinatory Design Methodology dedicated to the Ball & Roller Screw Drives. In ASME (American Society of Mechanical Engineers), "Proceedings of the ASME2010 Biennial Conference on Engineering Systems Design and Analysis" (pp. 361-370; 10). NEW-YORK, United States - New York: ASME (American Society of Mechanical Engineers). doi:10.1115/ESDA2010-24222
  • Ducobu, F., Rivière, E., & Filippi, E. (2010). "An ALE Model to Study the Depth of Cut Influence on Chip Formation in Orthogonal Cutting". Paper presented at Eighth International Conference on High Speed Machining, Metz, France.
    HSM2010_Ducobu_François.pdf (542kb)
  • Letot, C., & Dehombreux, P. (2010). "Reliability assessment from degradation models". Paper presented at 3rd International Conference on Accelerated Life Testing, Reliability-based Analysis and Design, Clermont Ferrand, France.
    leto2010b.pdf (1012kb)
  • Letot, C., Dehombreux, P., & Fleurquin, G. (2010). "Reliabilitix, un outil d'optimisation de la maintenance basé sur la fiabilité". Paper presented at Symposium international 'Maintenance et maîtrise des risques', Rabat, Morocco.
    leto2010_RABAT.pdf (1069kb)
  • Lesage, A. (17 February 2010). "Intégration des outils SPC/MSP dans la gestion de la maintenance". Poster session presented at Matinée des chercheurs MDC 2010, Bruxelles, Belgium.
    Matinée des Chercheurs 2010_LesageA.pdf (439kb)
  • Ducobu, F., Filippi, E., & Rivière, E. (17 February 2010). "Simulation de la coupe orthogonale du Ti6Al4V par la méthode aux éléments finis". Poster session presented at Matinée des Chercheurs, Bruxelles, Belgium.
    Ducobu_François_MdC10.pdf (3095kb)
  • Ducobu, F. (2010). "Notes de laboratoire de SolidWorks 2010 (Dessin Technique) : TP2".
  • Ducobu, F. (2010). "Notes de laboratoire de SolidWorks 2010 (Dessin Technique) : TP1".
  • Rivière, E. (11 June 2010). Coopération au développement : itinéraire d'un chercheur congolais. "Polytech.News, 44".
  • Rivière, E. (10 March 2010). Notre identité au sein de l'UMONS : entretien avec Monsieur le Recteur Calogero Conti. "Polytech.News, 43".
  • Ducobu, F. (2010). "Rapport du 2ème Comité d'accompagnement de Thèse - Étude du phénomène de coupe en micro-fraisage par enlèvement de copeaux".

2009

  • Basile, O., Dehombreux, P., & Filippi, E. (2009). On the Reliability of Mechanical Systems under Variable Constraints. In "Recent Advances in Maintenance and Infrastructure Management" (pp. 21-34). Springer.
    fede2009_TechnologiesforDependabilityMaintenance_OB_PD_EF.pdf (1897kb)
  • Riane, F., Roux, O., Basile, O., & Dehombreux, P. (2009). Simulation Based Approaches for Maintenance Strategies Optimization. In "Handbook of Maintenance Management and Engineering" (pp. 133-153). doi:10.1007/978-1-84882-472-0_7
    rian2009.pdf (762kb)
  • Ducobu, F., Rivière, E., & Filippi, E. (31 August 2009). "Modélisation de l'influence de la profondeur de coupe en micro-coupe orthogonale". Paper presented at 19ème Congrès Français de Mécanique, Marseille, France.
  • Ducobu, F., Filippi, E., & Rivière, E. (30 June 2009). "Investigations on chip formation in micro-milling". Paper presented at International Conference and Exhibition on Laser metrology, machine tool, CMM and robotic performance (LAMDAMAP 2009), Teddington, United Kingdom.
  • Ducobu, F., Filippi, E., & Rivière, E. (01 May 2009). "Chip Formation in Micromilling". Paper presented at 8th National Congress on Theoretical and Applied Mechanics, Bruxelles, Belgium.
  • Fleurquin, G., Lesenne, J.-M., Dehombreux, P., & Rivière, E. (2009). "Optimisation de la maintenance de lignes continues de production". Paper presented at PErformances et Nouvelles TechnolOgies en Maintenance, Autrans, France.
    PENTOM09_fleurquin.pdf (1555kb)
  • Zhang, Z., Riane, F., Dehombreux, P., Kilundu Y'E Bondo, B., & Choteau, F. (2009). "Development of an e-Platform for Managing Maintenance Operations". Paper presented at 4ème édition du Congrès PENTOM, Autrans, France.
    PaperPentom2009.pdf (835kb)
  • Letot, C., & Dehombreux, P. (2009). "Modèles de dégradation pour l'estimation de la fiabilité et de la durée de vie résiduelle : applications à la fissuration". Paper presented at 4ème édition du Congrès PENTOM, Autrans, France.
    leto2009_PENTOM.pdf (1011kb)
  • Letot, C., & Dehombreux, P. (2009). "A toolbox to assess reliability and degradation models". Paper presented at 2nd Symposium EUREKA ETE, Bruxelles, Belgium.
    leto2009_ETE.pdf (785kb)
  • Ducobu, F., Filippi, E., & Rivière, E. (2009). "Modélisation de l'influence de la profondeur de coupe en micro-coupe orthogonale". Paper presented at Congrès Français de mécanique, Marseille, France.
    CFM2009_Ducobu_François.pdf (315kb)
  • Fleurquin, G., Letot, C., Dehombreux, P., & Riane, F. (2009). "Assessing uncertainty from data collection to maintenance optimization". Paper presented at International Conference on Reliability, Maintainability and Safety, Chengdu, China.
    ICRMS2009_fleurquin.pdf (658kb)
  • Kilundu Y'E Bondo, B., Dehombreux, P., Mbusa, V., & Chiementin, X. (2009). "Decision trees and ICT for rolling bearing monitoring". Paper presented at International Congress Condition Monitoring and Diagnostic Engineering Management, .
    COMADEM_2009.pdf (1937kb)
  • Ducobu, F., Filippi, E., & Rivière, E. (2009). "Chip formation in micro-milling". Paper presented at National Congress of Theoretical and Applied Mechanics, VUB, Brussels, Belgium.
    NCTAM2009_Ducobu_François.pdf (1035kb)
  • Letot, C., & Dehombreux, P. (2009). "Degradation models for reliability estimation and mean residual lifetime". Paper presented at National Congress of Theoretical and Applied Mechanics, VUB, Brussels, Belgium.
    leto2009_NCTAM.pdf (473kb)
  • Chariot, C., Filippi, E., & Verlinden, O. (2009). "The interest of CPG's for locomotion control of self-reconfigurable robots". Paper presented at National Congress of Theoretical and Applied Mechanics, VUB, Brussels, Belgium.
    NCTAM2009-34.pdf (968kb)
  • Kilundu Y'E Bondo, B., Dehombreux, P., & Letot, C. (2009). "Estimation des seuils de surveillance vibratoire sur base d'arbres de décision et d'historiques de mesures". Paper presented at Congrès international sur l'ingénierie des risques industriels, Reims, France.
    CIRI09_Bovic.pdf (864kb)
  • Leviel, I., Lagoutte, S., Lemaire, B., Mbusa, V., Dehombreux, P., & Verlinden, O. (2009). "Acquisition et traitement de données vibratoires en temps réel". Paper presented at Congrès international sur l'ingénierie des risques industriels, Reims, France.
    CIRI030-LEVIEL.pdf (454kb)
  • Ducobu, F., Filippi, E., & Rivière, E. (2009). "Chip Formation and Minimum Chip Thickness in Micro-milling". Paper presented at CIRP conference on modelling of machining operations, San Sebastian, Spain.
    12thCIRP_Ducobu_François.pdf (754kb)
  • Ducobu, F., Filippi, E., & Rivière, E. (01 May 2009). "Chip Formation and Minimum Chip Thickness in Micro-milling". Poster session presented at 12th CIRP conference on modelling of machining operations, San Sebastian, Spain.
  • Rivière, E., Filippi, E., & Dehombreux, P. (15 April 2009). "Identification de modèles d'efforts de coupe en fraisage". Poster session presented at Lab' insight, Louvain-la-Neuve, Belgium.
  • Jerraya, A. A., Romdhani, M., Le Marrec, P., Hessel, F., Coste, P., Valderrama, C., Daveau, M., & Zergainoh, N.-E. (17 March 2009). "Modèles fiabilistes intégrant des mesures de dégradation". Poster session presented at Matinée des chercheurs 2009, Mons, Belgium.
    MDC2009.pdf (3521kb)
  • Beys, A. (17 March 2009). "L'apport de l'infographie pour l'étude comparée du savoir-faire dans l'application des techniques de la perspective chez les Primitifs Flamands et les Peintres de la Renaissance italienne". Poster session presented at Matinée des chercheurs (MDC'2009), Mons, Belgium.
    MDC2009_ABeys.pdf (2741kb)
  • Fleurquin, G. (17 March 2009). "Maintenance de lignes à production continue". Poster session presented at Matinée des chercheurs (MDC'2009), Mons, Belgium.
    MdC2009_Fleurquin.pdf (988kb)
  • Ducobu, F., Filippi, E., & Rivière, E. (17 March 2009). "Chip Formation and Minimum Chip Thickness in Micro-milling". Poster session presented at Matinée des chercheurs 2009, Mons, Belgium.
    Ducobu_François_MdC09.pdf (3674kb)
  • Chariot, C., Filippi, E., & Verlinden, O. (17 March 2009). "The interest of CPG's for locomotion control of self-reconfigurable robots". Poster session presented at Matinée des chercheurs 2009, Mons, Belgium.
  • Kilundu Y'E Bondo, B. (17 March 2009). "Télédiagnostic vibratoire des machines tournantes". Poster session presented at Matinée des chercheurs (MDC'2009), Mons, Belgium.
    Poster_MDC09_Bovic.pdf (826kb)
  • Ducobu, F. (2009). "Notes de laboratoire de SolidWorks 2009 (Dessin Technique) : TP2".
  • Ducobu, F. (2009). "Notes de laboratoire de SolidWorks 2009 (Dessin Technique) : TP1".
  • Ducobu, F. (2009). "Rapport du 1er Comité d'accompagnement de Thèse - Étude du phénomène de coupe en micro-fraisage par enlèvement de copeaux".

2008

  • Kilundu Y'E Bondo, B., & Dehombreux, P. (31 January 2008). Analyse spectrale singulière des signaux vibratoires et machine learning pour la surveillance d'usure d'outils. "Mécanique and Industries, 9" (1), 1-8.
    mi0243-2006.pdf (1309kb)
  • Kilundu Y'E Bondo, B., & Dehombreux, P. (31 January 2008). Data mining techniques and singular spectrum analysis for tool condition monitoring in metal cutting. "International Review of Mechanical Engineering, 2" (1), 49-55.
    IREME.pdf (4688kb)
  • Ducobu, F., Filippi, E., & Rivière, E. (05 November 2008). "Phénomènes de coupe en micro-fraisage par enlèvement de copeaux". Paper presented at Les thématiques de recherche du Pôle Matériaux en usinage par outils de coupe, Mons, Belgium.
  • Mbusa, V., Kilundu Y'E Bondo, B., & Dehombreux, P. (30 October 2008). "L'analyse vibratoire au service du diagnostic des machines". Paper presented at Séminaire sur la Maintenance et la Maîtrise des Risques, Rabat, Morocco.
  • Kilundu Y'E Bondo, B., Dehombreux, P., Letot, C., & Chiementin, X. (2008). "Early detection of bearing damage by means of decision trees". Paper presented at IFAC Conference on Intelligent Manufacturing Systems, .
    IFAC.pdf (491kb)
  • Rivière, E., Barboza, J., Filippi, E., & D'Alvise, L. (2008). "Cutting forces evaluation in milling using an analytical finite element mixed approach". Paper presented at 11th CIRP conference on modelling of machining operations, Gaithersburgh, United States.
    07_Cutting Forces Evaluation in Milling using an Analytical Finite Element method.pdf (395kb)
  • Fleurquin, G., Dehombreux, P., & Dersin, P. (2008). "Impact of uncertainty affecting reliability models on warranty contracts". Paper presented at Joint ESREL 2008 and 17th SRA-Europe Annual Conference, Valencia, Spain.
    fleiou.pdf (522kb)
  • Fleurquin, G. (26 February 2008). "Modélisation de la fiabilité et garantie d'équipements électroniques". Poster session presented at Matinée des Chercheurs 2008, Bruxelles, Belgium.
    Fleurquin_MdC2008.pdf (822kb)
  • Ducobu, F., Filippi, E., & Rivière, E. (26 February 2008). "Etude du phénomène de coupe en micro-fraisage par enlèvement de copeaux". Poster session presented at Matinée des Chercheurs 2008, Bruxelles, Belgium.
    Ducobu_François_MdC08.pdf (4160kb)
  • Kilundu Y'E Bondo, B. (2008). "Détection et diagnostic vibratoire de dégradations mécaniques : apport du data mining". Unpublished doctoral thesis, Université de Mons. Jury: .
    Bov_Thesis_Main.pdf (15252kb)
  • Ducobu, F., & Dehombreux, P. (2008). "Cours de Construction des Machines 3 - Liaisons hélicoïdales".
  • Ducobu, F. (2008). "Notes de laboratoire de SolidEdge (Dessin Technique) : TP2".
  • Ducobu, F. (2008). "Notes de laboratoire de Métrologie : TP4".
  • Ducobu, F. (2008). "Notes de laboratoire de SolidEdge (Dessin Technique) : TP1".

2007

  • de Arizon, J., Verlinden, O., & Dehombreux, P. (01 September 2007). Prediction of wheel wear in urban railway transport: comparison of existing models. "Vehicle System Dynamics, 45" (9), 849-874.
    2007-JdA-A-VSD.pdf (7354kb)
  • Rivière, E., Filippi, E., & Dehombreux, P. (12 February 2007). Inverse method for cutting forces parameters evaluation. "Engineering Mechanics: Journal for Theoretical and Applied Mechanics, 14" (5), 1-13.
    05_inverse method for cutting forces parameters evaluation.pdf (477kb)
  • Fleurquin, G., Roland, B., Basile, O., Riane, F., & Dehombreux, P. (01 January 2007). OPTIMAIN: plate-forme d'élaboration de stratégies de maintenance pour la gestion des systèmes complexes. "Revue Française de Gestion Industrielle, 26" (1), 25-45.
    RFGI_Fleurquin.pdf (507kb)
  • Rivière, E., Filippi, E., & Dehombreux, P. (01 January 2007). Chatter prediction using dynamic simulation. "International Review of Mechanical Engineering, 1" (1), 78-86.
    a04_Chatter prediction using dynamic simulation.pdf (460kb)
  • Beys, A. (06 December 2007). "L'apport de la Perspective Scientifique dans l'analyse des oeuvres picturales de la Renaissance". Paper presented at Expérimenter à la Renaissance, CESR - Tours, France.
  • Beys, A. (13 March 2007). "L'apport des méthodes de la Perspective Scientifique pour l'analyse, la datation et la restitution infographique des oeuvres picturales de Petrus Christus". Poster session presented at Matinée de Chercheurs de la Faculté Polytechnique de Mons, Mons, Belgium.
  • Rivière, E. (13 March 2007). "Forces, vibrations and roughness prediction in milling using dynamic simulation". Poster session presented at Matinée des chercheurs 2009, Mons, Belgium.
    postermdc2009.pdf (6994kb)
  • Rivière, E., Filippi, E., & Dehombreux, P. (12 March 2007). "Etude et simulation des procédés d'usinage à grande vitesse". Poster session presented at Matinée de Chercheurs de la Faculté Polytechnique de Mons, Mons, Belgium.
  • Fleurquin, G. (07 March 2007). "Maintenance Industrielle : Simulation, évaluation et optimisation d'une politique de maintenance". Poster session presented at Matinée des chercheurs (MDC'2007), Mons, Belgium.
    aMDC2007_final.pdf (3483kb)
  • Ducobu, F. (2007). "Mise au point d'un modèle détaillé permettant le calcul de la consommation d'énergie primaire des pompes à chaleur utilisées pour le chauffage domestique". Unpublished master thesis, Université de Mons. Jury: Frère, M. (Promotor), & Feldheim, V. (Promotor).
  • Rivière, E. (2007). "Etude et simulation de procédés de fraisage grande vitesse : stabilité, efforts de coupe, états de surface". Unpublished doctoral thesis, Université de Mons. Jury: Filippi, E. (Promotor), Dehombreux, P. (Promotor), Verlinden, O., Conti, C., Stas, A., de Meester, B., Lybaert, P., Delchambre, A., Van Herck, P., & Debongnie, J.-F.
  • Ducobu, F. (2007). "Réalisation de l'étanchéité du différentiel central d'une berline 4x4".

2006

  • Rivière, E., Filippi, E., & Dehombreux, P. (16 May 2006). "Forces, vibrations and roughness prediction in milling using dynamic simulation". Paper presented at 7th National Congress on theoretical and applied Mechanics (NCTAM 2006), Mons, Belgium.
  • Rivière, E., Stalon, V., Vandenabeele, O., Filippi, E., & Dehombreux, P. (16 May 2006). "Chatter detection using a microphone". Paper presented at 7th National Congress on theoretical and applied Mechanics (NCTAM 2006), Mons, Belgium.
  • Beys, A. (2006). "L'apport des méthodes de la Perspective Scientifique pour l'analyse, la datation et la restitution infographique des oeuvres picturales de la Renaissance et en particulier de celles produites par le Primitif Flamand Petrus Christus". Unpublished master thesis, Université de Mons. Jury: .
  • Ducobu, F. (2006). "Analyse du différentiel Torsen".

2005

  • Kilundu Y'E Bondo, B. (2005). "A feature selection approach based on principal component analysis and synaptic weights for mechanical faults diagnosis". Paper presented at ESREL 2005 Conference, Gdansk, Poland.
    ES144.pdf (1225kb)
  • Ducobu, F. (2005). "Définition et description des méthodes de fabrication d'un bell de frein".

2004

  • Kilundu Y'E Bondo, B. (2004). "Des réseaux de neurones pour la détection et la classification des défauts mécaniques des machines tournantes : Mémoire de DEA". Unpublished master thesis, Université de Mons. Jury: .
    TFE_DEA.pdf (2693kb)
  • Ducobu, F. (2004). "Réalisation d'un pont". doi:10.1088/1748-0221/5/03/T03001

2003

  • Defosse, Y., Moeyaert, V., Robette, L., & Wuilpart, M. (28 May 2003). "Dispositif de contrôle d'un réseau de transmission de signaux optiques (brevet européen EP1315318A2 - dépôt 27/11/2001- actuellement non suivi)".
    EP1315318A2.pdf (426kb)

1999

  • Dupont, P. (31 October 1999). "INA ZSL Lager in Güterzug-Lokomotiven !" Paper presented at Bahn Tagungen 1999, HERZOGENAURACH, Germany.
  • Gusarov, A. I., Strarodubov, D., Berghmans, F., Deparis, O., Defosse, Y., Fernandez-Fernandez, A., Decréton, M., Mégret, P., & Blondel, M. (1999). "Design of a radiation-hard optical fibre Bragg grating temperature sensor". Paper presented at Photonics for Space and Radiation Environments, Florence, Italy.

1998

  • Dupont, P. (31 October 1998). "Einiger belgisher Linearanwendungen in sonder Textilmaschinen". Paper presented at IIIT-1998 - INA Internationale Ingenieure Tagungen 1998, HERZOGENAURACH, Deutschland, EU, HERZOGENAURACH, Germany.
  • Dupont, P. (31 October 1998). "Benützung von Gleitlagern in Kurvenrollen ? Ist es denkbar ?!" Paper presented at IIIT-1998 - INA Internationale Ingenieure Tagungen 1998, HERZOGENAURACH, Deutschland, EU, HERZOGENAURACH, Germany.

1997

  • Dehombreux, P., Verlinden, O., & Conti, C. (01 January 1997). An Implicit Multistage Method including Projection for the Numerical Simulation of Constrained Multibody Systems. "Multibody System Dynamics, 1", 405-424.
    1997-PD-P-MSD.pdf (6922kb)
  • Dupont, P. (31 October 1997). "über zwei belgischer Sonderlinearanwendungen im Bereich Raumfahrtprüfstand & Glasbearbeitungsmaschinen !" Paper presented at IIIT-1997 - INA Internationale Ingenieure Tagungen 1997, HERZOGENAURACH, Deutschland, EU.

1996

  • Conti, C., Dehombreux, P., Verlinden, O., & Datoussaïd, S. (01 January 1996). Analysis of the Performance of Operational Data Analysis Methods. "Mechanical Systems and Signal Processing, 10" (5), 579-593.

1991

  • Dehombreux, P., Conti, C., & Verlinden, O. (01 June 1991). A numerical Stabilization Algorithm based on the Introduction of a Constraint Violation Factor. "European Journal of Mechanical Engineering, 36" (2), 99-104.
    1991-PD-P-EJME.pdf (2854kb)